using pbe-m5-400, 6.04 at present, most of the m5 gear are pbe. Am
wondering if the update to 6.04 put any of them into auto channel mode?
On 07/26/2017 12:58 PM, Tyson wrote:
pretty sure Josh is right on. on the stations that don't have the
channels that the newer ones have update the firmware. can't remember
what version is the oldest that accepts it, but 5.6.2 kind of rings a
bell. we have 6.0.4 and I know that works. to add more channels
need to activate UNII rules under the system tab on all our m5 gear
so that doesn't happen. Nanostation m5s throw me off the most since
they do some eds channels but not all so it's easier to get lucky and
work out of the box and forget on them.
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Josh Luthman <[email protected]>
Date: 7/26/17 3:08 PM (GMT-05:00)
To: Ubiquiti Users Group <[email protected]>
Subject: Re: [Ubnt_users] changing channels on me?
Are you saying the station's frequency is only doing the upper
channels? Depending on which m5 radio it is, you might not have
access to 5.1 or 5.4 (pre/post an FCC key...)
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 26, 2017 at 3:06 PM, Jan Van Kort
<[email protected] <mailto:[email protected]>> wrote:
channel 37 does not have a (DFS) next to it in the list
On 07/26/2017 11:55 AM, Josh Luthman wrote:
DFS channels it will have to vacate, yes.
I suggest setting multiple frequencies on the AP so it cycles
through them.
Josh Luthman
Office: 937-552-2340 <tel:%28937%29%20552-2340>
Direct: 937-552-2343 <tel:%28937%29%20552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 26, 2017 at 2:53 PM, Jan Van Kort
<[email protected] <mailto:[email protected]>>
wrote:
two issues: I've got some m5 gear that seem able to change
channels
after install on their own. I've found a couple that were in
auto mode
(never allowed here) and a few more that were in not normal
channel
selections. Does this happen as a result of firmware updates?
I've noticed on the newer radios they have a wider range of
channel
selections, but this seems weird as another new one out of
same parts
order pile won't have the same range. I'll set the access
point for
channel 37 and go over to the receive station and it won't
see it.
Cannot connect them, the station will only go to 147.
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
