We have found, every time, without exception there are only a few causes:

* Not enough backhaul. :)

* Sector is heavily loaded.
* Customers with excessively weak signals pulling the sector down
* #1 INTERFERENCE. Gotta LOVE airmagic and airview on prism aps.

YMMV,

JP

On Mon, 19 Feb 2018 16:38:01 +0000, Steve Barnes wrote
> I am trying to get every last drop out of our internet.  Most towers have a 
> MikroTik Routing, Netonix doing POE and Switching, Fed by AF5x, and Rockets 
> or Prism for AP’s.  Sometimes seeing some slow downs I cant account for. 
> Wonderingif MTU or Flow control needs adjusted.
>  
> The MTU settings are as follows:
> MikroTik MTU: 1500  L2 MTU: 1598         Flow Disabled
> Netonix MTU: 1528                                      Both
> AF5x Up to 9600 Auto                                  Flow Disabled
> Rocket MTU: 1500                                        Flow Disabled
> Prism MTU: 1500                                           Flow Disabled
>  
> In your experience should any of these be adjusted? 
>  
> Steve Barnes
> Wireless Operations Manager
> New Lisbon Broadband
> NLBC.COM
> PCSWIN.COM
> 765-584-2288 ext:1101
>  
> -- 
> This message has been scanned for viruses and dangerous content by 
> E.F.A. Project, and is believed to be clean.

Joe Portman 
Alamo Broadband Inc. 
www.alamobroadband.com
 
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to