i like Michaels Marine in Edmonds for electrical work Date: Sat, 20 Feb 2010 23:27:05 -0800 From: [email protected] Subject: Re: [UnifliteWorld] Re: Looking for a good boat electrician in Puget Sound To: [email protected]
That's where we're fortunate in Alaska. We have tidal grids to do things like transducer replacement on. I expect the EPA will be taking those away from us before long though. Nothing sensible like that is allowed to stay these days. John --- On Sat, 2/20/10, Larryjack54 <[email protected]> wrote: From: Larryjack54 <[email protected]> Subject: [UnifliteWorld] Re: Looking for a good boat electrician in Puget Sound To: "UnifliteWorld" <[email protected]> Date: Saturday, February 20, 2010, 9:23 PM I agree with Perry and Cindy. Not many of us own Uniflites so I feel like that puts us in a very unique group. I plan to rewire the flybidge on mine also as it is full of old spaghetti also. I plan to use a few wiring junction blocks to help eliminate a lot of the extra hot wires and ground wires. As Perry suggested, by taking it one wire at a time, you can group your wiring in to a nice neat bundle and slowly the spaghetti will be gone. Probably the first thing to do is develop a plan and visualize it. It seems very complicated and intimidating because of all the extra useless wiring you see. It will take you a little time but you will really be proud of your baby once it is complete. Our Home Depot has tinned wiring along with stainless connectors and, as you might expect are much cheaper than going to your local boat store. The stuff from O'riellys, Autozone, Pep Boys, and the rest won't hold up there. Of course, if everybody quits doing business with the local stores, they will eventually go under, and that's not good either. Kind of a damned if you do and damned if you don't kinda thing. My only complaint with my 48 footer is the designers obviously counted on little 4 foot midgets to do the work under the dash. I have one little hole to crawl through on my belly. Now, if someone could come up with a way to change out a transducer without having to pay for a haul out or sinking the boat, I'm all ears. On Feb 20, 10:29 pm, "Perry & Cindi" <[email protected]> wrote: > Good Luck > > _____ > > From: [email protected] [mailto:[email protected]] > On Behalf Of Kerry Lebel > Sent: Saturday, February 20, 2010 9:24 PM > To: [email protected] > Subject: RE: [UnifliteWorld] Looking for a good boat electrician in Puget > Sound > > Thanks Perry. I could do the work myself but I just don't have the time. I > am traveling heavily for work these days or I would tackle it myself. I > know full well that I would not get it done before boating season with as > few free hours as I will have before then. > > From: [email protected] [mailto:[email protected]] > On Behalf Of Perry & Cindi > Sent: Saturday, February 20, 2010 5:20 PM > To: [email protected] > Subject: RE: [UnifliteWorld] Looking for a good boat electrician in Puget > Sound > > If you are electrical handy then go for it. Do ONE wire at a time, chase it > down and see where it goes. If it is a dead wire junk it, use new tined wire > and marine terminal ends not automotive wire and ends. Buy a GOOD wire > crimper, not the $3.95 crimper. Take your time and do not get ahead of your > self > > If you like doing this kind of work, it will be a fun job but time > consuming. > > Capt. Perry > > _____ > > From: [email protected] [mailto:[email protected]] > On Behalf Of Kerry Lebel > Sent: Saturday, February 20, 2010 7:37 PM > To: [email protected] > Subject: [UnifliteWorld] Looking for a good boat electrician in Puget Sound > > Hey All, > > One of the things I want to get done before spring is a rewire of my > flybridge. It is a wiring nightmare. I had it all re-gelcoated and need to > replace the gauges and pull out all the old wiring that goes absolutely > nowhere. I would do it myself but I have no idea where to start on that > rats nest. Anyone have suggestions? > > Thanks, > > Kerry > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/unifliteworld?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group athttp://groups.google.com/group/unifliteworld?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/unifliteworld?hl=en. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en. _________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft. http://clk.atdmt.com/GBL/go/201469230/direct/01/ -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
