I have a 42ft Uniflite with the original door.At the bottom of the door it contains a window made of perspex about 2 x 2ft. Never been able to figure why at the bottom of the door. I suppose for reversing when one is at the helm inside the boat. Hope this sheds some light. John On Feb 24, 2014 7:21 PM, "Bernie Meisinger" <[email protected]> wrote:
> I'm getting ready to fabricate a new door for my 42 aft cabin using > fiberglass. Will probably have some kind of glass or porthole or portlight. > Will let you know about that. > > Not sure what plastic wood is but there are a lot of folks using Starboard > for everything and anything. It's great for making cutting board but don't > use it for much else. > > I've also made molds for the baffles that go behind engine air intakes on > the hull sides of 42 sport fisher, convertibles, aft cabins and > kingfishers, and Chris Craft 426. Replacing the old brittle plastic with > fiberglass baffles keeps the air boxes drier, and I also made them to keep > bugs (bees, wasps) from building hives and nests in the air boxes. > > > > -----Original Message----- > From: [email protected] > To: unifliteworld > Sent: Mon, Feb 24, 2014 9:47 am > Subject: RE: [UnifliteWorld] Replacing the cabin door > > Ditto for me > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]?>] *On > Behalf Of *Bob S > *Sent:* Monday, February 24, 2014 2:45 PM > *To:* [email protected] > *Subject:* Re: [UnifliteWorld] Replacing the cabin door > > > > Kerry, > > > > I have the same problem with my door and would love it if you would let me > know what you finally decide to do. There are some good door fabricators at > the boat show but I discovered they work on Mega Yachts and are priced > accordingly. The all Plastic door sounds great if priced OK and looks OK. > > > > On Tue, Feb 18, 2014 at 4:22 PM, Kerry Lebel <[email protected]> wrote: > > Thanks Roland. Did you build your own door out of that plastic wood or > have someone else do it? What was the process? > > > -Kerry > > > > On Tue, Feb 18, 2014 at 1:22 PM, rjb.jr <[email protected]> wrote: > > Kerry > > My 28' uniflite mega had a bad door I had it replaced with that plastic > wood it's been 8 years and you would not know it was change unless I told > you. It will never rot again. That plastic wood was wide enough > > it was made in one piece, window put back in. No more rot there. Good Luck > Roland > > ----- Original Message ----- > > *From:* Kerry Lebel <[email protected]> > > *To:* unifliteworld@googlegroups. com > > *Sent:* Tuesday, February 18, 2014 3:37 PM > > *Subject:* [UnifliteWorld] Replacing the cabin door > > > > Hey All. I have a '77 42' DCMY that I am in "project mode" on right now. > One of the projects is to replace the outside cabin door. Has anyone done > this before? The weather up here in the Northwest has taken its toll and > it is time to replace it. It is NOT a standard door though. Any ideas? > Any suggestions would be great. > > > > Thanks, > > > > -Kerry > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/groups/opt_out. > > > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/groups/opt_out. > > > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/groups/opt_out. > ------------------------------ > > *This message and any attachments are solely for the use of the intended > recipients. They may contain privileged and/or confidential information or > other information protected from disclosure. If you are not an intended > recipient, you are hereby notified that you received this email in error > and that any review, dissemination, distribution or copying of this email > and any attachment is strictly prohibited. If you have received this email > in error, please contact the sender and delete the message and any > attachment from your system.* > > *Thank You.* > ------------------------------ > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out.
