Hi Bernie, if you are not too far from Olympia,I would like to come around and see your boat. John On Feb 25, 2014 12:54 PM, "John Hitchcock" <[email protected]> wrote:
> I have a 42ft Uniflite with the original door.At the bottom of the door it > contains a window made of perspex about 2 x 2ft. Never been able to figure > why at the bottom of the door. I suppose for reversing when one is at the > helm inside the boat. Hope this sheds some light. John > On Feb 24, 2014 7:21 PM, "Bernie Meisinger" <[email protected]> wrote: > >> I'm getting ready to fabricate a new door for my 42 aft cabin using >> fiberglass. Will probably have some kind of glass or porthole or portlight. >> Will let you know about that. >> >> Not sure what plastic wood is but there are a lot of folks using >> Starboard for everything and anything. It's great for making cutting board >> but don't use it for much else. >> >> I've also made molds for the baffles that go behind engine air intakes on >> the hull sides of 42 sport fisher, convertibles, aft cabins and >> kingfishers, and Chris Craft 426. Replacing the old brittle plastic with >> fiberglass baffles keeps the air boxes drier, and I also made them to keep >> bugs (bees, wasps) from building hives and nests in the air boxes. >> >> >> >> -----Original Message----- >> From: [email protected] >> To: unifliteworld >> Sent: Mon, Feb 24, 2014 9:47 am >> Subject: RE: [UnifliteWorld] Replacing the cabin door >> >> Ditto for me >> >> >> >> *From:* [email protected] [ >> mailto:[email protected] <[email protected]?>] *On >> Behalf Of *Bob S >> *Sent:* Monday, February 24, 2014 2:45 PM >> *To:* [email protected] >> *Subject:* Re: [UnifliteWorld] Replacing the cabin door >> >> >> >> Kerry, >> >> >> >> I have the same problem with my door and would love it if you would let >> me know what you finally decide to do. There are some good door fabricators >> at the boat show but I discovered they work on Mega Yachts and are priced >> accordingly. The all Plastic door sounds great if priced OK and looks OK. >> >> >> >> On Tue, Feb 18, 2014 at 4:22 PM, Kerry Lebel <[email protected]> >> wrote: >> >> Thanks Roland. Did you build your own door out of that plastic wood or >> have someone else do it? What was the process? >> >> >> -Kerry >> >> >> >> On Tue, Feb 18, 2014 at 1:22 PM, rjb.jr <[email protected]> wrote: >> >> Kerry >> >> My 28' uniflite mega had a bad door I had it replaced with that plastic >> wood it's been 8 years and you would not know it was change unless I told >> you. It will never rot again. That plastic wood was wide enough >> >> it was made in one piece, window put back in. No more rot there. Good >> Luck Roland >> >> ----- Original Message ----- >> >> *From:* Kerry Lebel <[email protected]> >> >> *To:* unifliteworld@googlegroups. com >> >> *Sent:* Tuesday, February 18, 2014 3:37 PM >> >> *Subject:* [UnifliteWorld] Replacing the cabin door >> >> >> >> Hey All. I have a '77 42' DCMY that I am in "project mode" on right now. >> One of the projects is to replace the outside cabin door. Has anyone done >> this before? The weather up here in the Northwest has taken its toll and >> it is time to replace it. It is NOT a standard door though. Any ideas? >> Any suggestions would be great. >> >> >> >> Thanks, >> >> >> >> -Kerry >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/groups/opt_out. >> ------------------------------ >> >> *This message and any attachments are solely for the use of the intended >> recipients. They may contain privileged and/or confidential information or >> other information protected from disclosure. If you are not an intended >> recipient, you are hereby notified that you received this email in error >> and that any review, dissemination, distribution or copying of this email >> and any attachment is strictly prohibited. If you have received this email >> in error, please contact the sender and delete the message and any >> attachment from your system.* >> >> *Thank You.* >> ------------------------------ >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/groups/opt_out. >> > -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out.
