Hi John, Sorry, I'm in Ventura, Ca. We're about 70 miles North of Los Angeles.
The boat is still in the midst of a refit so there isn't much to see. I've had her for seven years and also work in the boat repair and fabrication industry. The cobblers children are always barefoot. I hope to have my boat done by end of year. Bernie Meisinger 818-692-5355 -----Original Message----- From: [email protected] To: unifliteworld <[email protected]> Sent: Tue, Feb 25, 2014 7:58 am Subject: Re: RE: [UnifliteWorld] Replacing the cabin door Hi Bernie, if you are not too far from Olympia,I would like to come around and see your boat. John On Feb 25, 2014 12:54 PM, "John Hitchcock" <[email protected]> wrote: I have a 42ft Uniflite with the original door.At the bottom of the door it contains a window made of perspex about 2 x 2ft. Never been able to figure why at the bottom of the door. I suppose for reversing when one is at the helm inside the boat. Hope this sheds some light. John On Feb 24, 2014 7:21 PM, "Bernie Meisinger" <[email protected]> wrote: I'm getting ready to fabricate a new door for my 42 aft cabin using fiberglass. Will probably have some kind of glass or porthole or portlight. Will let you know about that. Not sure what plastic wood is but there are a lot of folks using Starboard for everything and anything. It's great for making cutting board but don't use it for much else. I've also made molds for the baffles that go behind engine air intakes on the hull sides of 42 sport fisher, convertibles, aft cabins and kingfishers, and Chris Craft 426. Replacing the old brittle plastic with fiberglass baffles keeps the air boxes drier, and I also made them to keep bugs (bees, wasps) from building hives and nests in the air boxes. -----Original Message----- From: [email protected] To: unifliteworld Sent: Mon, Feb 24, 2014 9:47 am Subject: RE: [UnifliteWorld] Replacing the cabin door Ditto for me From: [email protected] [mailto:[email protected]] On Behalf Of Bob S Sent: Monday, February 24, 2014 2:45 PM To: [email protected] Subject: Re: [UnifliteWorld] Replacing the cabin door Kerry, I have the same problem with my door and would love it if you would let me know what you finally decide to do. There are some good door fabricators at the boat show but I discovered they work on Mega Yachts and are priced accordingly. The all Plastic door sounds great if priced OK and looks OK. On Tue, Feb 18, 2014 at 4:22 PM, Kerry Lebel <[email protected]> wrote: Thanks Roland. Did you build your own door out of that plastic wood or have someone else do it? What was the process? -Kerry On Tue, Feb 18, 2014 at 1:22 PM, rjb.jr <[email protected]> wrote: Kerry My 28' uniflite mega had a bad door I had it replaced with that plastic wood it's been 8 years and you would not know it was change unless I told you. It will never rot again. That plastic wood was wide enough it was made in one piece, window put back in. No more rot there. Good Luck Roland ----- Original Message ----- From: Kerry Lebel To: unifliteworld@googlegroups. com Sent: Tuesday, February 18, 2014 3:37 PM Subject: [UnifliteWorld] Replacing the cabin door Hey All. I have a '77 42' DCMY that I am in "project mode" on right now. One of the projects is to replace the outside cabin door. Has anyone done this before? The weather up here in the Northwest has taken its toll and it is time to replace it. It is NOT a standard door though. Any ideas? Any suggestions would be great. Thanks, -Kerry -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out. This message and any attachments are solely for the use of the intended recipients. They may contain privileged and/or confidential information or other information protected from disclosure. If you are not an intended recipient, you are hereby notified that you received this email in error and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system. Thank You. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/groups/opt_out.
