Ford, I don't think you will have much luck with the Parallel port. Epson has not written a Mac driver for the parallel port connection :-( You might, however, have some luck using a parallel to USB cable and Epson's USB driver for the 700.
I have downloaded the Apple Localtalk Bridge software, but have not tried using it. The ReadMe File indicates that it will not work if there is another network connection in the setup. Your mileage may vary. I have read some interesting experiments where people have been successful using some of the "other" printer drivers to get their non-supported Epson printer to work with OSX. Nancy PS: To avoid confusing people (me included) I think your Epson 700 is like our's. Our's has a serial connector and a parallel one. > Bailey wrote: > No PC's here. Are you sure it's Appletalk Bridge, or is it LocalTalk > Bridge ? > > What do you know-- it does have a parallel port! Would the driver > recognize the port? > > Thanks very much- I'll try the parallel port route... -- Unsupported OS X is sponsored by <http://lowendmac.com/> Support Low End Mac <http://lowendmac.com/lists/support.html> Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
