Hi Bernie,
i had the same and found it being caused by the wrong path variables.. again
;°) i still had path variables from v5_beta installation, so batchren did
not find all correct dll?s .. when i removed the wrong path?s and only left
those for the actual v5 installation everything worked fine..
another thing with broken images was that in real i had to switch box
rendering off.. else the boxes got mixed up and frames were broken
the problem with config files is that i would need to have sets of config
files for each possible installation as program?s folders may differ for
user to user :°(
best regards
Gunnar
----- Original Message -----
From: "Bernie @ VRgrafix" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, August 29, 2006 10:29 AM
Subject: Re: frame or sequence based network rendering - solved (tut)
G'day Gunnar -
Well good news is perseverance has paid off - have got it working ! :)
Bad news is i'm still having a few problems getting RS to actually
"complete" rendering a lot of the frames (50% have 0 bytes) log files show
it having problems finding the sub images:
Cannot find sub image C:\Documents and
Settings\user/.realsoft/temp/BallFilerender0_box_0_0.r3i
and the batchren itself not loading for some reason. But half do render so
it must be doing something right ;)
batchren.c/ 196: Cannot load:V5.1
Cannot load:V5.1
File batchren.c, Line 196
Requeueing frame...
I'll keep fiddling - it certainly has promise !
Will try to shoot you my findings direct. (Initial problems with master
and slave not starting stemmed from having spaces in config files)
Also might be beneficial to actually post these config files vs showing on
html page as I have had to re-format a lot as it seems to make a big
difference in it actually working. (ie spaces / return locations)
Cheers
Bernie
