I am going to assume that you mean guide placement. Well, there are several ways to place the guides. You may want to check the net, or at least check the FAQ on this at www.rodbuilding.org, then do a temporary placement of guides, and a stress test to see what it looks like.
You can also check out the guide spacing at: http://www.flyanglersonline.com/begin/graphite/part9.html and then do the stress test from there to see how it works. Rob On Wednesday 25 December 2002 01:53 pm, Desert Eagle wrote: > Dose anyone have the placement measurements for an 8' fiberglass fly rod > ? A friend of mine has one that all the guilds are gone off of it and he > wants me to try to "Fix" it. More than likely I will have to remove the > epoxy finish off of it as well, any tips ? And, before anyone asks, this > rod was "re-built" ounce before so I have no idea which guild marks are > the correct ones, whoever did it before just "Stuck" them on and believe > me, they were "Way" off of what it should have been. > > Thanks, > Jimi -- "In our family, there is no clear line between religion and fly fishing." Norman Maclean Rob Blomquist Kirkland, WA
