4,8,14,21,29,37,45 1/2,54,65 or put the top guide 4 1/2 inches from the tip, the stripping guide 28 to 34 inches from the butt, space out the rest in a eye pleasing pattern the do a stress test. Flip the rod over with a line from the butt to the tip and bend the rod using the line adjust the guides when the line touches the blank. Dan ----- Original Message ----- From: "Desert Eagle" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, December 25, 2002 4:53 PM Subject: [VFB] 8' rod guild placement ???
> Dose anyone have the placement measurements for an 8' fiberglass fly rod ? A > friend of mine has one that all the guilds are gone off of it and he wants > me to try to "Fix" it. More than likely I will have to remove the epoxy > finish off of it as well, any tips ? And, before anyone asks, this rod was > "re-built" ounce before so I have no idea which guild marks are the correct > ones, whoever did it before just "Stuck" them on and believe me, they were > "Way" off of what it should have been. > > Thanks, > Jimi > >
