--- Dennis Myhand <[EMAIL PROTECTED]> wrote: > Just to give an update. All the cables are > connected properly and > securely. All chips are like-wise. I have checked > the battery, and it > shows 3.617 volts, DC. I have zapped the PRAM, and > I have removed the > two daughter cards from the logic board, zapped the > PRAM, and still no > chime, no start. Does anyone have an idea of where > I should go next, > before I download a system image on my G-3 and > reinstall the system? Or > should that simply be my next move? Thanks, Dennis
Look for a jumper marked W1, if your IIci has the ROM SIMM slot installed, the jumper should be close to it. IIRC, W1 should NOT have a jumper installed when there is no ROM SIMM installed. Have you tried removing and replacing the RAM? Tried only having the RAM in Bank A? Swapped RAM from Bank B to Bank A? Two daughter cards? One in the cache slot and one in a NuBus slot? What cards are they? It will be total Fandemonium! August (Fri) 4th, (Sat) 5th & (Sun) 6th, 2006 http://www.fandemonium.org ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
