Sandy,
Does spot clean work on carpet?
If so, would you put some kind of cleaning fluid on the carpet first? or is
spot clean just for hard floors?

-----Original Message-----
From: 'Sandratomkins' via VIPhone [mailto:[email protected]] 
Sent: Sunday, June 26, 2016 3:57 PM
To: [email protected]
Subject: Re: Small update on the BotVac app accessibility.

Marie,
The left button does the spot clean. As for it getting stuck, I have only
had mine stuck twice, that I can remember, in both cases, I just moved the
Bot just enough to free it and left it. After about 30 seconds, it started
up again by itself. Not sure if this is typical or not. Early days for all
of us By the way, have you sorted out how to change between Turbo and Eco
yet? If you need directions, let me know, it took me a little while to spot
it!

Sandy. !! 

sent from the dark side of the moon

> On 26 Jun 2016, at 18:05, Marie <[email protected]> wrote:
> 
> Okay, I got the vac connected to the internet. This morning I started it
up using the home button and it went on its way. that is, until it got stuck
under a table. I was alerted to this and went and located the vac. I pulled
it out and check the screen on the ITouch. There was the message that
cleaning was suspended and the Show Options, which I clicked on. The only
option which did anything was to to go back and reset the map. I clicked on
it and got the message that it was ready to clean but when I click on the
Play button, nothing happens other than a beep from the vac.
> So what now? I tried the Be My Eyes and she said she could not read the
screen.
> And by the way, what does the left button do?
> Thanks. Marie
> 
> 
> -----Original Message----- From: 'Sandratomkins' via VIPhone
> Sent: Sunday, June 26, 2016 3:56 AM
> To: [email protected]
> Subject: Re: Small update on the BotVac app accessibility.
> 
> Marie,
> 
>   I can't remember if I wrote this before: So, at the risk of repeating
myself, press the button to the right of the handle, with the straight edge
nearest you, holding down for 15 seconds and wait. You should hear a tune,
you will have reset your Bot to default settings. If the Bot has not yet
been successfully connected to the wifi, it still won't be. However, once
the wifi is turned on again by way of the settings on the machine itself, it
will then show up again as an access point. This happened to me too! I can
only say that you do, for now, need help with the initial setting up of the
wifi and this means, until the set up is completed. I have just spend the
last week alone, apart from a mad Irish Water Spaniel, who is of no help at
all! and my machine has worked flawlessly, doing the house every day for me,
despite muddy paw prints!! Once you have got past this initial hiccough, you
should be good to go. I know that, at first, while you are getting used to
the Bot, it feels frustrating getting error messages that don't explain
themselves via the app, and I am hoping that, as more of us use the BotVac,
we can encourage an improvement in the app, but you soon learn that the
error messages that you don't receive, are, in general, of three types, I.E.
Bin needs emptying, Brushes need cleaning and Battery needs charging. This
last one happened to me because, while I thought it was properly docked and
charging, it had been knocked by the dog's ball slightly off. For now, I am
using Be My Eyes when I get stuck, not the best solution, but useful
nevertheless. However, in order to get the most out of BME, you do need to
know what to ask your volunteer to look for. For example, when I was wanting
to know the battery status, my helper couldn't see the screen. She said it
looked blank, I had a little thought and pressed, just a short press, of the
'home" button, the one to the right of the handle, this turned the Bot on
and my helper on BME could see the screen and read the status for me.
> 
>   Truly, this will sort itself, and you will learn how to deal with the
Bot, where, at the moment, we cannot read for ourselves the screen.
> 
>   Always remember, just a press of that same button will start you Bot
off, in its default setting, I.E. Clean house in Turbo mode, and then return
to dock.
> 
>   Please do keep us posted with your progress as other people are buying
this Bot and we can all learn from each other!!
> 
> Sandy.
> 
> sent from the dark side of the moon
> 
>> On 25 Jun 2016, at 22:28, Marie <[email protected]> wrote:
>> 
>> Well I think you might have underestimated the ease of getting connected
to the WyFy. I had my sister turn it on and then thought I would be able to
complete the process with the app. I got through all the steps up to waiting
the 3 minutes for it to connect. At the end of that, I got the message that
it failed to connect with no explanation except to check the display screen.
If I could see the display screen I would not need the app. So I am a bit
frustrated now with no sighted assistance available and no way to get
started. When I try to repeat the process, the Neato no longer shows up as
an access point on the WyFy settings? any suggestions?
>> Marie
>> 
>> 
>> -----Original Message----- From: 'Sandratomkins' via VIPhone
>> Sent: Tuesday, June 14, 2016 6:14 AM
>> To: [email protected]
>> Subject: Small update on the BotVac app accessibility.
>> 
>> Hi all,
>> 
>>  After a little panic on my part, i now find I can use the app a little
better! i just managed to change Turbo to Eco. I just did a spot clean, when
it cleans an area, either 2 meters x 2 meters or 4 meters x 4 meters. Then
it returns to base. I did this by just pressing a button, so very easy.
Useful for rugs or single rooms. My issues with my house network wifi
settings are almost resolved, touch wood. I am discovering that the best way
to deal with the vac is to let it do its own thing, I.E., "clean house"
either with the app or just press a button, there are only two buttons, and
then leaving it to finish. From my reading, this is true for all users, but
especially for us, as not all notifications are sent to the app, some show
up on the onboard screen and need to be read. I find it a bit concerning
replacing the Bot on its dock, visually, you can tell by the lights that it
is in the right position, but without the clues, hard to tell. So a quick
way to be sure would be to do a "spot clean" by pressing one button, when it
has finished, it will go home and play a tune and send a message.
>> 
>> Still very happy, floors cleaner than they have been for years!
>> Smug, Sandy.
>> 
>> sent from the dark side of the moon
>> 
>> -- 
>> The following information is important for all members of the V iPhone
list.
>> 
>> If you have any questions or concerns about the running of this list, or
if you feel that a member's post is inappropriate, please contact the owners
or moderators directly rather than posting on the list itself.
>> 
>> Your V iPhone list moderator is Mark Taylor and your owner is Cara Quinn
- you can reach Cara at [email protected]
>> 
>> The archives for this list can be searched at:
>> http://www.mail-archive.com/[email protected]/
>> --- You received this message because you are subscribed to the Google
Groups "VIPhone" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
>> To post to this group, send email to [email protected].
>> Visit this group at https://groups.google.com/group/viphone.
>> For more options, visit https://groups.google.com/d/optout.
>> -- 
>> The following information is important for all members of the V iPhone
list.
>> 
>> If you have any questions or concerns about the running of this list, or
if you feel that a member's post is inappropriate, please contact the owners
or moderators directly rather than posting on the list itself.
>> 
>> Your V iPhone list moderator is Mark Taylor and your owner is Cara Quinn
- you can reach Cara at [email protected]
>> 
>> The archives for this list can be searched at:
>> http://www.mail-archive.com/[email protected]/
>> --- You received this message because you are subscribed to the Google
Groups "VIPhone" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
>> To post to this group, send email to [email protected].
>> Visit this group at https://groups.google.com/group/viphone.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> The following information is important for all members of the V iPhone
list.
> 
> If you have any questions or concerns about the running of this list, or
if you feel that a member's post is inappropriate, please contact the owners
or moderators directly rather than posting on the list itself.
> 
> Your V iPhone list moderator is Mark Taylor and your owner is Cara Quinn -
you can reach Cara at [email protected]
> 
> The archives for this list can be searched at:
> http://www.mail-archive.com/[email protected]/
> --- You received this message because you are subscribed to the Google
Groups "VIPhone" group.
> To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/viphone.
> For more options, visit https://groups.google.com/d/optout. 
> -- 
> The following information is important for all members of the V iPhone
list.
> 
> If you have any questions or concerns about the running of this list, or
if you feel that a member's post is inappropriate, please contact the owners
or moderators directly rather than posting on the list itself.
> 
> Your V iPhone list moderator is Mark Taylor and your owner is Cara Quinn -
you can reach Cara at [email protected]
> 
> The archives for this list can be searched at:
> http://www.mail-archive.com/[email protected]/
> --- You received this message because you are subscribed to the Google
Groups "VIPhone" group.
> To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/viphone.
> For more options, visit https://groups.google.com/d/optout.

-- 
The following information is important for all members of the V iPhone list.

If you have any questions or concerns about the running of this list, or if
you feel that a member's post is inappropriate, please contact the owners or
moderators directly rather than posting on the list itself.

Your V iPhone list moderator is Mark Taylor and your owner is Cara Quinn -
you can reach Cara at [email protected]

The archives for this list can be searched at:
http://www.mail-archive.com/[email protected]/
--- 
You received this message because you are subscribed to the Google Groups
"VIPhone" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/viphone.
For more options, visit https://groups.google.com/d/optout.

-- 
The following information is important for all members of the V iPhone list.

If you have any questions or concerns about the running of this list, or if you 
feel that a member's post is inappropriate, please contact the owners or 
moderators directly rather than posting on the list itself.

Your V iPhone list moderator is Mark Taylor and your owner is Cara Quinn - you 
can reach Cara at [email protected]

The archives for this list can be searched at:
http://www.mail-archive.com/[email protected]/
--- 
You received this message because you are subscribed to the Google Groups 
"VIPhone" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/viphone.
For more options, visit https://groups.google.com/d/optout.

Reply via email to