When I try to use the CP FLASHCOPY command I get an error message that indicates the control unit does not support this function. The DS6800 has the correct license because I can invoke the DSCLI commands for flashcopy on the SMC...
Any ideas what the problem could be? (I have tried using the website http://www.ibm.com/support/us/ for research, but the elements that support VM do not appear to be up. Also I have tried to access the website for the VM listserv to see if similar problems have already been reported, but no luck in accessing that website. Although I can see activity on the listserv from the emails discussing problems...) link $dasd$ 1000 1 rr DASD 0001 LINKED R/O; R/W BY MAINT Ready; T=0.01/0.01 06:33:25 att 2000 * 2 DASD 2000 ATTACHED TO MAINT 0002 WITH DEVCTL Ready; T=0.01/0.01 06:33:35 flashcopy 1 000 end 2 000 end HCPNFC332E Invalid control unit type - 1 Ready(00332); T=0.01/0.01 06:33:57 The HCPNFC332E message: HCP332E Invalid control unit type - <rdev|vdev> Explanation: The device is attached to a control unit that is not valid for the entered command. The control unit does not support this function. System Action: The command is not executed. Operator Response: Enter the command again specifying the device number of a device that is attached to a valid control unit. Note: The SET CACHE command cannot be entered for a 3880 Model 11 or 21. The $DASD$ userid: USER $DASD$ NOLOG * ------ zVM 5.1 Volumes ------------------------ MDISK 1000 3390 000 END 510RES MR xxxxxxxx xxxxxxxx xxxxxxxx Within the IOCP the DS6800 is defined as: FICON CHPID PATH=(10),PCHID=110,TYPE=FC,SHARED CHPID PATH=(11),PCHID=111,TYPE=FC,SHARED CHPID PATH=(12),PCHID=112,TYPE=FC,SHARED CHPID PATH=(13),PCHID=113,TYPE=FC,SHARED FICON CHPID PATH=(14),PCHID=140,TYPE=FC,SHARED CHPID PATH=(15),PCHID=141,TYPE=FC,SHARED CHPID PATH=(16),PCHID=142,TYPE=FC,SHARED CHPID PATH=(17),PCHID=143,TYPE=FC,SHARED DASD CNTLUNIT CUNUMBR=100,PATH=(10,14,15,11),UNITADD=((00,256)), X CUADD=0,UNIT=1750 IODEVICE ADDRESS=(1000,256),UNIT=3390,CUNUMBR=100,PATH=10, X STADET=Y,PART=VM1 DASD CNTLUNIT CUNUMBR=200,PATH=(10,14,15,11),UNITADD=((00,256)), X CUADD=8,UNIT=1750 IODEVICE ADDRESS=(2000,256),UNIT=3390,CUNUMBR=200,PATH=10, X STADET=Y,PART=(VM1,IFL) Thank you. Cecelia Dusha WHS/ITMD/AEFDD 703-697-2305
