The reaction that Rossi's customer has come up with is just as mysterious as the one that Rossi is using. How did Rossi become familiar with this customer who is really holding their technology very closely?
A SPECULATIVE answer to this might be that Rossi is a customer of this secretive customer. Ross must use the product of this customer. There must be a pre-established longstanding relationship between this customer and Rossi. Rossi must get a precursor of his nickel powder from this company. We have heard the the reaction that this mystery company uses is a variation of the one that Johnson Matthey uses. So this endothermic mystery reaction must be one that produces a nickel based catalyst because we fairly much know that Rossi uses nickel powder. IH must not know what nickel based catalyst product that Rossi is using, and Rossi is not about to let anybody know who this company is and what product that this company generates. Rossi must have wanted to improve this company's cost effectiveness for his own benefit to reduce the cost of the catalyst that he is using. There must be a friendly relationship between the secret company and Rossi that would inspire this company to get involved with Rossi. When the test was setup, Rossi must not have envisioned that the identity of this company would be an issue in a court case. The takeaway from this speculation, being part of Rossi's product supply chain, the degree of secrecy that this company was subjected to must be integrally linked to Rossi's own technology. Nano-skeletal catalyst: https://www.google.com/patents/US9023754 Quote: "The oxide etching apparatus preferably employs a supercritical etch solution, while the leaching apparatus preferably employs a supercritical leaching solution. In certain embodiments where the use of leaching is appropriate, selective leaching with a basic solution is preferably used to remove the substantial portion of the filler material from the bulk structure. Preferably, the filler material left is present in a relatively stable alloy phase (e.g., the alloy phase is more stable than other alloy phases given the set of materials)." The production of Nano dimensioned nickel requires multiple leching operations using water near the boiling point. The aluminum substrate must be removed to reveal the microparticles of nickel with nano dimensional surface features. multiple leaching operations using a fluorine based gas or acid may be used and the application of plasma treatment as was seen in the Lugano powder. The waste heat would be flushed down the drain on repeated cycles until all substrate material is removes from the nickel micro powder. Evidence of plasma sintering and the presence of molybdenum, chromium. and rare earths upon assay examination of the Lugano fuel was a mystery until the plasma sintering of equal parts aluminum and nickel micron sized particles with additives is revealed in the nickel Nano-skeletal catalyst patent. Acid or gas etching of aluminum oxide to remove the aluminum substrate using multiple etching cycles would be needed to produce a highly purified resulting product. For every leaching cycle, how much heat would be required to bring 500 gallons of 13C ground water up 75C optimum leaching temperature. How many leaching cycles are required to purify a batch of nano nickel powder is not known. The leaching process must use a double tank configuration to maintain the constant flow of steam with one tank receiving steam while the other tank is being drained down the effluent disposal. Rossi will not allow IH to see this process since it is central and pivotal to the functioning of his technology. On Sun, Aug 14, 2016 at 3:51 PM, Jed Rothwell <[email protected]> wrote: > Peter Gluck <[email protected]> wrote: > > > >> a) the test does not depend on what the Customer makes with the nergy >> makes useful things as chemicals or throws it away- via a sytem of more >> heat exchangers- steam water is in a closed circuit >> > > It is impossible to "throw away" heat. That violates the conservation of > energy. Put in all the heat exchangers you want, you still have 1 MW of > heat coming from the overall system. This is easy to detect. If this heat > is not ventilated, it will kill everyone in the warehouse area. If it is > ventilated, the stream of hot air or steam from ventilation system will be > easy to detect. NOT SUCH HEAT HAS BEEN DETECTED. Not anywhere. There is no > heat. > > Rossi now claims that the product in factory magically swallows up the > heat in an endothermic reaction. That is impossible, as I am sure you know. > > - Jed > >
