On Thursday 28 October 2004 7:53 pm, Tom Bowden wrote: > With epoxy, it can be very difficult to remove a broken or worn tip-top > that needs replacing.
Not with the 5 minute that I or many, many others use. All one does, is loop a rubber band through the tip, stretch it tight with the rod shaft in line, and flick a bic under it. It will be off when it comes flying from the rod by the rubber band. If the rubber band breaks, and you didn't pull it too hard, the tip is getting too hot, and it may be a bear to remove it. Rob --- Mountlake Terrace, WA
