Many thanks for your continued help, patience & prompt reply. I had read that the TP link option was struggling.
Just double checking, are you suggesting I should consider buying : *WUS02 Meteobridge uploadserver* As a user friendly solution ? Cordially........ On Sat, 12 Dec 2020 at 17:22, galfert <[email protected]> wrote: > Since you mentioned that you are interested in the Ambient WeatherBridge I > thought you should know that I'm no longer recommending the WeatherBridge. > I feel that the TP-Link hardware has reached its limit (not enough CPU > power and software code is running at 94% RAM used, which makes menu > navigation frustrating and unreliable. It is just that the Meteobridge > software keeps gaining more and more capabilites and needing more > resources. But fear not as the software in the WeatherLink is just > Meteobridge and the good news is that now you can run Meteobridge on a > Raspberry Pi and it runs perfectly. You gain the Meteobridge PRO features > and it runs really fast and reliably. Do keep in mind that Meteobridge on > the Raspberry Pi requires special SD card so be sure to review those > recommendations. It is very simple to set up as you just copy the image to > the SD card and power the Raspberry Pi on and then it is ready to go for > you to configure with its nice web interface. > > > > On Saturday, December 12, 2020 at 11:07:05 AM UTC-5 [email protected] > wrote: > >> Many thanks for your continued help. >> >> I have ordered a Froggit DP1500 ( UK - 868 MHz ) >> >> I note your comments regarding customised upload ( Ecowitt protocol ) >> >> I also read you posting regarding GW1000 API driver, ( your posting >> July 23rd 2020 refers ) >> >> https://www.wxforum.net/index.php?topic=40033.0 >> >> I think I may be at my limit with Raspberry Pi, but will endeavour. >> >> I believe another approach maybe using Ambient weatherbridge, however I >> believe they are no longer available.... >> >> Can you confirm if the Ambient weatherbridge software is available to >> purchase ? >> >> I ultimately want to send data to Windy. >> >> I have managed to get Windy to accept my IP Cam, so data hookup will make >> it complete ( for now ) >> >> Cordially >> >> >> >> >> >> On Fri, 11 Dec 2020 at 21:11, galfert <[email protected]> wrote: >> >>> To connect the Sainlogic WS3500 to WeeWX you'll have the following >>> options: >>> >>> - Use WS View to configure the "Customized" server upload feature. There >>> you'll choose Ecowitt protocol (not WU as that limits sensor available). >>> You'll point it to your WeeWX system using the port and interval that you >>> want. Then in WeeWX you'll install the Interceptor driver and configure it >>> for type ecowitt-client. Make sure you listening port matches and that >>> there are no firewall issues with that port and you are set. >>> >>> - The other way is to buy the Ecowitt GW1000 with matching frequency of >>> your Sainlogic (433, 868, or 915 MHz) and or if you have 868 MHz you can >>> also get the Froggit DP1500 which is the same thing as a GW1000 with 868 >>> MHz. Then you'll be able to use the WeeWX GW1000 API driver which is really >>> nicely done and you can expand your station much further with even more >>> sensors. >>> >>> >>> >>> On Friday, December 11, 2020 at 12:36:21 PM UTC-5 [email protected] >>> wrote: >>> >>>> I did not know that.......... >>>> >>>> Cheers for now.......... >>>> >>>> Logs to follow............. >>>> >>>> Cordially >>>> >>>> Paul >>>> >>>> On Fri, 11 Dec 2020 at 17:33, Tom Keffer <[email protected]> wrote: >>>> >>>>> I doubt WeeWX would run at the same time as EasyWeather, but I could >>>>> be wrong. The log will reveal. >>>>> >>>>> On Fri, Dec 11, 2020 at 9:31 AM Paul C Merritt <[email protected]> >>>>> wrote: >>>>> >>>>>> Tom, >>>>>> >>>>>> Many Thanks for taking the time to respond so promptly....... >>>>>> >>>>>> I'll grab the data / logs and come back to you.......tomorrow now. >>>>>> >>>>>> The tool or listing to find compatible hardware I got from >>>>>> http://weewx.com/docs/hardware.htm >>>>>> >>>>>> Using the software WS View which was part of the out of the box >>>>>> package, I managed to connect to wunderground. ( copy screenshot >>>>>> attached ) >>>>>> >>>>>> I am looking to expand my horizions with Weewx / Raspberry Pi >>>>>> >>>>>> Cordially >>>>>> >>>>>> Paul >>>>>> >>>>>> On Fri, 11 Dec 2020 at 17:18, Tom Keffer <[email protected]> wrote: >>>>>> >>>>>>> Hard to say without seeing the log. See the wiki article Help! >>>>>>> Posting to weewx user >>>>>>> <https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user> for >>>>>>> how to get a good log. >>>>>>> >>>>>>> Also, what do you mean by, "I cant see the Sainlogic WS3500". Using >>>>>>> what tool? >>>>>>> >>>>>>> Finally, how are you posting to the WU if weewx is not running? >>>>>>> >>>>>>> -tk >>>>>>> >>>>>>> >>>>>>> On Fri, Dec 11, 2020 at 8:14 AM PCM <[email protected]> wrote: >>>>>>> >>>>>>>> I am New to both Weewx & Raspberry Pi so please bear with me. >>>>>>>> >>>>>>>> My Sainlogic WS3500 is up & running and I am connected To >>>>>>>> Wunderground , PWS and others. >>>>>>>> >>>>>>>> https://www.wunderground.com/dashboard/pws/INEWAR40 >>>>>>>> >>>>>>>> I am trying to install & run weewx, however I am getting an error >>>>>>>> >>>>>>>> "Unable to load driver " >>>>>>>> >>>>>>>> I have checked listed devices, I cant see the Sainlogic WS3500 >>>>>>>> >>>>>>>> a) Can anyone advise if the Sainlogic is compatible with weewx ? >>>>>>>> b) Any advice on remedy for driver error message ? >>>>>>>> >>>>>>>> Many Thanks....... >>>>>>>> >>>>>>>> Cordially >>>>>>>> >>>>>>>> PCM >>>>>>>> Newark >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/61f0b2b8-ed06-43b1-a571-7b8ae7020f27n%40googlegroups.com >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/61f0b2b8-ed06-43b1-a571-7b8ae7020f27n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to a topic in >>>>>>> the Google Groups "weewx-user" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe >>>>>>> . >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBQKGPyK1Ru%2BXzwBH8j%2Be36QU8%3DV%3D%2BVV1v3sy1FF6HSfQ%40mail.gmail.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBQKGPyK1Ru%2BXzwBH8j%2Be36QU8%3DV%3D%2BVV1v3sy1FF6HSfQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/CA%2BLVZkRkPBcU-ZXovLUid6jV8nkfSoVOToMaz9H9Fhu3o1G7Ng%40mail.gmail.com >>>>>> <https://groups.google.com/d/msgid/weewx-user/CA%2BLVZkRkPBcU-ZXovLUid6jV8nkfSoVOToMaz9H9Fhu3o1G7Ng%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "weewx-user" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEA%2BrViGGr-uY9E9Xbg5rVUOiE3tB%2BKYVWoP3h%2BiW7h7wQ%40mail.gmail.com >>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEA%2BrViGGr-uY9E9Xbg5rVUOiE3tB%2BKYVWoP3h%2BiW7h7wQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/970f8e8d-ffb3-4257-b684-bcb03c178585n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/970f8e8d-ffb3-4257-b684-bcb03c178585n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/f091f91d-24ba-4965-bf3a-e0b97dea5081n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/f091f91d-24ba-4965-bf3a-e0b97dea5081n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CA%2BLVZkR1EH8ZQxsPYjuOrNSoDVuQ5twp6suYs1we0JTv2E6SBQ%40mail.gmail.com.
