Top man....cheers.... On Sat, 12 Dec 2020, 19:14 galfert, <[email protected]> wrote:
> No do not get the WU S02. That is using TP-Link hardware. I suggest > instead that you buy a Raspberry Pi 4B and buy the appropriate microSD card > that is SLC (in the compatibility list) and then download the Meteobridge > software. It is only 65 Euros to register the Meteobridge software license. > > You'll need: > - Raspberry Pi 4B (1, 2, 4, or 8 GB ...doesn't matter but 2 or 4 GB is > probably the better investment) > - 8 or 16 GB WD Sandisc SLC microSD card ...it must be one of these: > SDSDQED-008G-XI or SDSDQED-016G-XI > - download Raspberry Pi image: > > https://www.meteobridge.com/wiki/index.php/Preparing_Hardware#Copying_the_Meteobridge_disk_image_onto_a_Raspberry_Pi_microSD_card > - You should have a good 3 or 3.5 Amp power supply for the Pi 4B (USB-C) - > get something designed for the Pi > - Get any case you like for the Pi 4B. I like the Flirc case because it > cools without a fan > > It is easy. You'll use BalenaEtcher free software to copy the image to the > SD card and you are done. > > > > > > On Saturday, December 12, 2020 at 1:02:32 PM UTC-5 [email protected] > wrote: > >> Many thanks for your continued help, patience & prompt reply. >> >> I had read that the TP link option was struggling. >> >> Just double checking, are you suggesting I should consider buying : >> >> *WUS02 Meteobridge uploadserver* >> >> As a user friendly solution ? >> >> Cordially........ >> >> >> >> >> On Sat, 12 Dec 2020 at 17:22, galfert <[email protected]> wrote: >> >>> Since you mentioned that you are interested in the Ambient WeatherBridge >>> I thought you should know that I'm no longer recommending the >>> WeatherBridge. I feel that the TP-Link hardware has reached its limit (not >>> enough CPU power and software code is running at 94% RAM used, which makes >>> menu navigation frustrating and unreliable. It is just that the Meteobridge >>> software keeps gaining more and more capabilites and needing more >>> resources. But fear not as the software in the WeatherLink is just >>> Meteobridge and the good news is that now you can run Meteobridge on a >>> Raspberry Pi and it runs perfectly. You gain the Meteobridge PRO features >>> and it runs really fast and reliably. Do keep in mind that Meteobridge on >>> the Raspberry Pi requires special SD card so be sure to review those >>> recommendations. It is very simple to set up as you just copy the image to >>> the SD card and power the Raspberry Pi on and then it is ready to go for >>> you to configure with its nice web interface. >>> >>> >>> >>> On Saturday, December 12, 2020 at 11:07:05 AM UTC-5 [email protected] >>> wrote: >>> >>>> Many thanks for your continued help. >>>> >>>> I have ordered a Froggit DP1500 ( UK - 868 MHz ) >>>> >>>> I note your comments regarding customised upload ( Ecowitt protocol ) >>>> >>>> I also read you posting regarding GW1000 API driver, ( your posting >>>> July 23rd 2020 refers ) >>>> >>>> https://www.wxforum.net/index.php?topic=40033.0 >>>> >>>> I think I may be at my limit with Raspberry Pi, but will endeavour. >>>> >>>> I believe another approach maybe using Ambient weatherbridge, however I >>>> believe they are no longer available.... >>>> >>>> Can you confirm if the Ambient weatherbridge software is available to >>>> purchase ? >>>> >>>> I ultimately want to send data to Windy. >>>> >>>> I have managed to get Windy to accept my IP Cam, so data hookup will >>>> make it complete ( for now ) >>>> >>>> Cordially >>>> >>>> >>>> >>>> >>>> >>>> On Fri, 11 Dec 2020 at 21:11, galfert <[email protected]> wrote: >>>> >>>>> To connect the Sainlogic WS3500 to WeeWX you'll have the following >>>>> options: >>>>> >>>>> - Use WS View to configure the "Customized" server upload feature. >>>>> There you'll choose Ecowitt protocol (not WU as that limits sensor >>>>> available). You'll point it to your WeeWX system using the port and >>>>> interval that you want. Then in WeeWX you'll install the Interceptor >>>>> driver >>>>> and configure it for type ecowitt-client. Make sure you listening port >>>>> matches and that there are no firewall issues with that port and you are >>>>> set. >>>>> >>>>> - The other way is to buy the Ecowitt GW1000 with matching frequency >>>>> of your Sainlogic (433, 868, or 915 MHz) and or if you have 868 MHz you >>>>> can >>>>> also get the Froggit DP1500 which is the same thing as a GW1000 with 868 >>>>> MHz. Then you'll be able to use the WeeWX GW1000 API driver which is >>>>> really >>>>> nicely done and you can expand your station much further with even more >>>>> sensors. >>>>> >>>>> >>>>> >>>>> On Friday, December 11, 2020 at 12:36:21 PM UTC-5 [email protected] >>>>> wrote: >>>>> >>>>>> I did not know that.......... >>>>>> >>>>>> Cheers for now.......... >>>>>> >>>>>> Logs to follow............. >>>>>> >>>>>> Cordially >>>>>> >>>>>> Paul >>>>>> >>>>>> On Fri, 11 Dec 2020 at 17:33, Tom Keffer <[email protected]> wrote: >>>>>> >>>>>>> I doubt WeeWX would run at the same time as EasyWeather, but I could >>>>>>> be wrong. The log will reveal. >>>>>>> >>>>>>> On Fri, Dec 11, 2020 at 9:31 AM Paul C Merritt <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Tom, >>>>>>>> >>>>>>>> Many Thanks for taking the time to respond so promptly....... >>>>>>>> >>>>>>>> I'll grab the data / logs and come back to you.......tomorrow now. >>>>>>>> >>>>>>>> The tool or listing to find compatible hardware I got from >>>>>>>> http://weewx.com/docs/hardware.htm >>>>>>>> >>>>>>>> Using the software WS View which was part of the out of the box >>>>>>>> package, I managed to connect to wunderground. ( copy screenshot >>>>>>>> attached ) >>>>>>>> >>>>>>>> I am looking to expand my horizions with Weewx / Raspberry Pi >>>>>>>> >>>>>>>> Cordially >>>>>>>> >>>>>>>> Paul >>>>>>>> >>>>>>>> On Fri, 11 Dec 2020 at 17:18, Tom Keffer <[email protected]> wrote: >>>>>>>> >>>>>>>>> Hard to say without seeing the log. See the wiki article Help! >>>>>>>>> Posting to weewx user >>>>>>>>> <https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user> for >>>>>>>>> how to get a good log. >>>>>>>>> >>>>>>>>> Also, what do you mean by, "I cant see the Sainlogic WS3500". >>>>>>>>> Using what tool? >>>>>>>>> >>>>>>>>> Finally, how are you posting to the WU if weewx is not running? >>>>>>>>> >>>>>>>>> -tk >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, Dec 11, 2020 at 8:14 AM PCM <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> I am New to both Weewx & Raspberry Pi so please bear with me. >>>>>>>>>> >>>>>>>>>> My Sainlogic WS3500 is up & running and I am connected To >>>>>>>>>> Wunderground , PWS and others. >>>>>>>>>> >>>>>>>>>> https://www.wunderground.com/dashboard/pws/INEWAR40 >>>>>>>>>> >>>>>>>>>> I am trying to install & run weewx, however I am getting an error >>>>>>>>>> >>>>>>>>>> "Unable to load driver " >>>>>>>>>> >>>>>>>>>> I have checked listed devices, I cant see the Sainlogic WS3500 >>>>>>>>>> >>>>>>>>>> a) Can anyone advise if the Sainlogic is compatible with weewx ? >>>>>>>>>> b) Any advice on remedy for driver error message ? >>>>>>>>>> >>>>>>>>>> Many Thanks....... >>>>>>>>>> >>>>>>>>>> Cordially >>>>>>>>>> >>>>>>>>>> PCM >>>>>>>>>> Newark >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/61f0b2b8-ed06-43b1-a571-7b8ae7020f27n%40googlegroups.com >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/61f0b2b8-ed06-43b1-a571-7b8ae7020f27n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe >>>>>>>>> . >>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>> to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBQKGPyK1Ru%2BXzwBH8j%2Be36QU8%3DV%3D%2BVV1v3sy1FF6HSfQ%40mail.gmail.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBQKGPyK1Ru%2BXzwBH8j%2Be36QU8%3DV%3D%2BVV1v3sy1FF6HSfQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/CA%2BLVZkRkPBcU-ZXovLUid6jV8nkfSoVOToMaz9H9Fhu3o1G7Ng%40mail.gmail.com >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CA%2BLVZkRkPBcU-ZXovLUid6jV8nkfSoVOToMaz9H9Fhu3o1G7Ng%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to a topic in >>>>>>> the Google Groups "weewx-user" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe >>>>>>> . >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> [email protected]. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEA%2BrViGGr-uY9E9Xbg5rVUOiE3tB%2BKYVWoP3h%2BiW7h7wQ%40mail.gmail.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEA%2BrViGGr-uY9E9Xbg5rVUOiE3tB%2BKYVWoP3h%2BiW7h7wQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "weewx-user" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/970f8e8d-ffb3-4257-b684-bcb03c178585n%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/970f8e8d-ffb3-4257-b684-bcb03c178585n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/f091f91d-24ba-4965-bf3a-e0b97dea5081n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/f091f91d-24ba-4965-bf3a-e0b97dea5081n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/AKqPg-YxRSY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/8a749096-15fb-47c3-a5e6-6ff1bdf07e1bn%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/8a749096-15fb-47c3-a5e6-6ff1bdf07e1bn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CA%2BLVZkSmuHAxcj-7Y632bSSxM4MLJ9Mhfm_amPs_mjSM6OAMrw%40mail.gmail.com.
