Hmmm! even more curiouser....I notice from my webpage that data was 
collected and posted yesterday....after having nothing updated for almost 2 
weeks!

On Friday, 12 March 2021 at 13:06:27 UTC+13 monmul wrote:

> So, if it is the RPi then it is either a sofward corruption on the card 
> caused by the repeated rebooting after the fuse trips....or else some 
> hardward failure on the board was the cause of the tripping. Its strange 
> that since reassembling the Envoy, RPi etc there has not been a fuse trip.
>
> One other thought occurs to me...I have a powered USB Hub attached to the 
> RPi(its a 3B)....maybe I should disconnect the hub and try the Envoy 
> directly into the RPi......if minicom works that would point to the Hub as 
> being the culpit....!!??
>
> On Friday, 12 March 2021 at 12:51:51 UTC+13 monmul wrote:
>
>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop
>> [ ok ] Stopping weewx (via systemctl): weewx.service.
>> pi@WeatherPi:~ $ wee_device --clear-memory
>> Using configuration file /etc/weewx/weewx.conf
>> Using Vantage driver version 3.2.1 (weewx.drivers.vantage)
>> Proceeding will erase all archive records.
>> Are you sure you wish to proceed (y/n)? y
>> Erasing all archive records ...
>> Archive records erased.
>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0
>>
>>
>> Welcome to minicom 2.7
>>
>> OPTIONS: I18n 
>> Compiled on Apr 22 2017, 09:14:19.
>> Port /dev/ttyUSB0, 12:49:30
>>
>> Press CTRL-A Z for help on special keys
>> .
>> .
>> .
>>
>>
>> Again no return of TEST or NVER
>>
>> On Friday, 12 March 2021 at 12:46:43 UTC+13 monmul wrote:
>>
>>> So, having put the old Envoy back on the Rpi (having shown it worked on 
>>> the PC) this is what I get....looks like some kind of continuous Loop 
>>> situation.
>>>
>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop
>>> [ ok ] Stopping weewx (via systemctl): weewx.service.
>>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0
>>>
>>>
>>>
>>> Welcome to minicom 2.7
>>>
>>> OPTIONS: I18n 
>>> Compiled on Apr 22 2017, 09:14:19.
>>> Port /dev/ttyUSB0, 12:42:51
>>>
>>> Press CTRL-A Z for help on special keys
>>>
>>> LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿÂ         b 2
>>> v)LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿÂ       b 2
>>> ULOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½        b 2
>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> ¾LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> ±LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> «LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> «LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> ¾—LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> ¾—LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> ³˜LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2
>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> ]eLOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> Á LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½       b 2          
>>>    
>>>
>>> ¤LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½         b 2
>>> âYLOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5⊑? ÿÿÿÿÿÿÿ½       b 2
>>> ¾LOO1 =vŠ 4I Áÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
>>>
>>> On Friday, 12 March 2021 at 12:40:56 UTC+13 monmul wrote:
>>>
>>>> But from the tests on my PC, it seems the old Envoy is working....does 
>>>> it not.(so we do not have to worry about the new Envoy for now!)...so it 
>>>> would appear as if the RPi is the culpit....have I deducted correctly?
>>>>
>>>> On Friday, 12 March 2021 at 02:29:03 UTC+13 tke...@gmail.com wrote:
>>>>
>>>>> They did, but it was about 7 or 8 years ago. 
>>>>>
>>>>> You really need to call Davis. 
>>>>>
>>>>> On Wed, Mar 10, 2021 at 7:22 PM Graham Eddy <graha...@gmail.com> 
>>>>> wrote:
>>>>>
>>>>>> i do recall that davis introduced an incompatability between old 
>>>>>> firmware and new datalogger but i don’t recall the details. i’m sure a 
>>>>>> search of the forum archive would see if that was relevant
>>>>>>
>>>>>> On 11 Mar 2021, at 2:17 pm, monmul <dunb...@gmail.com> wrote:
>>>>>>
>>>>>> Yes I am using the original data logger and cable that came with the 
>>>>>> old Envoy....I take out the data logger from he old one and put it in 
>>>>>> the 
>>>>>> new one...I suspect that the data logger may not be compatible with the 
>>>>>> new 
>>>>>> Envoy
>>>>>>
>>>>>>
>>>>>> -- 
>>>>>> You received this message because you are subscribed to the Google 
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it, 
>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>
>>>>> To view this discussion on the web visit 
>>>>>> https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com
>>>>>>  
>>>>>> <https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>>
>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/6f0b9c7b-f89f-4646-9530-a8e57a789c2dn%40googlegroups.com.

Reply via email to