A big THANK YOU to all who helped me out on this, I really appreciate the help and guidance....sorry it turned into a wild goose chase!
On Friday, 12 March 2021 at 16:24:28 UTC+13 monmul wrote: > Yep fully functional again....updating on the website...WTF!.....are these > things sent to us to just test our patience!! > > On Friday, 12 March 2021 at 13:30:30 UTC+13 monmul wrote: > >> Hmmm! even more curiouser....I notice from my webpage that data was >> collected and posted yesterday....after having nothing updated for almost 2 >> weeks! >> >> On Friday, 12 March 2021 at 13:06:27 UTC+13 monmul wrote: >> >>> So, if it is the RPi then it is either a sofward corruption on the card >>> caused by the repeated rebooting after the fuse trips....or else some >>> hardward failure on the board was the cause of the tripping. Its strange >>> that since reassembling the Envoy, RPi etc there has not been a fuse trip. >>> >>> One other thought occurs to me...I have a powered USB Hub attached to >>> the RPi(its a 3B)....maybe I should disconnect the hub and try the Envoy >>> directly into the RPi......if minicom works that would point to the Hub as >>> being the culpit....!!?? >>> >>> On Friday, 12 March 2021 at 12:51:51 UTC+13 monmul wrote: >>> >>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>> pi@WeatherPi:~ $ wee_device --clear-memory >>>> Using configuration file /etc/weewx/weewx.conf >>>> Using Vantage driver version 3.2.1 (weewx.drivers.vantage) >>>> Proceeding will erase all archive records. >>>> Are you sure you wish to proceed (y/n)? y >>>> Erasing all archive records ... >>>> Archive records erased. >>>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0 >>>> >>>> >>>> Welcome to minicom 2.7 >>>> >>>> OPTIONS: I18n >>>> Compiled on Apr 22 2017, 09:14:19. >>>> Port /dev/ttyUSB0, 12:49:30 >>>> >>>> Press CTRL-A Z for help on special keys >>>> . >>>> . >>>> . >>>> >>>> >>>> Again no return of TEST or NVER >>>> >>>> On Friday, 12 March 2021 at 12:46:43 UTC+13 monmul wrote: >>>> >>>>> So, having put the old Envoy back on the Rpi (having shown it worked >>>>> on the PC) this is what I get....looks like some kind of continuous Loop >>>>> situation. >>>>> >>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0 >>>>> >>>>> >>>>> >>>>> Welcome to minicom 2.7 >>>>> >>>>> OPTIONS: I18n >>>>> Compiled on Apr 22 2017, 09:14:19. >>>>> Port /dev/ttyUSB0, 12:42:51 >>>>> >>>>> Press CTRL-A Z for help on special keys >>>>> >>>>> LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ b 2 >>>>> v)LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ b 2 >>>>> ULOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> ¾LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> ±LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> «LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> «LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> ¾—LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> ¾—LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> ³˜LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> ]eLOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> Á LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> >>>>> >>>>> ¤LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>> âYLOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5⊑? ÿÿÿÿÿÿÿ½ b 2 >>>>> ¾LOO1 =vŠ 4I Áÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ >>>>> >>>>> On Friday, 12 March 2021 at 12:40:56 UTC+13 monmul wrote: >>>>> >>>>>> But from the tests on my PC, it seems the old Envoy is >>>>>> working....does it not.(so we do not have to worry about the new Envoy >>>>>> for >>>>>> now!)...so it would appear as if the RPi is the culpit....have I >>>>>> deducted >>>>>> correctly? >>>>>> >>>>>> On Friday, 12 March 2021 at 02:29:03 UTC+13 tke...@gmail.com wrote: >>>>>> >>>>>>> They did, but it was about 7 or 8 years ago. >>>>>>> >>>>>>> You really need to call Davis. >>>>>>> >>>>>>> On Wed, Mar 10, 2021 at 7:22 PM Graham Eddy <graha...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> i do recall that davis introduced an incompatability between old >>>>>>>> firmware and new datalogger but i don’t recall the details. i’m sure a >>>>>>>> search of the forum archive would see if that was relevant >>>>>>>> >>>>>>>> On 11 Mar 2021, at 2:17 pm, monmul <dunb...@gmail.com> wrote: >>>>>>>> >>>>>>>> Yes I am using the original data logger and cable that came with >>>>>>>> the old Envoy....I take out the data logger from he old one and put it >>>>>>>> in >>>>>>>> the new one...I suspect that the data logger may not be compatible >>>>>>>> with the >>>>>>>> new Envoy >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2fdd6346-b088-4f58-bac0-f80130177f9fn%40googlegroups.com.
