Yep fully functional again....updating on the website...WTF!.....are these things sent to us to just test our patience!!
On Friday, 12 March 2021 at 13:30:30 UTC+13 monmul wrote: > Hmmm! even more curiouser....I notice from my webpage that data was > collected and posted yesterday....after having nothing updated for almost 2 > weeks! > > On Friday, 12 March 2021 at 13:06:27 UTC+13 monmul wrote: > >> So, if it is the RPi then it is either a sofward corruption on the card >> caused by the repeated rebooting after the fuse trips....or else some >> hardward failure on the board was the cause of the tripping. Its strange >> that since reassembling the Envoy, RPi etc there has not been a fuse trip. >> >> One other thought occurs to me...I have a powered USB Hub attached to the >> RPi(its a 3B)....maybe I should disconnect the hub and try the Envoy >> directly into the RPi......if minicom works that would point to the Hub as >> being the culpit....!!?? >> >> On Friday, 12 March 2021 at 12:51:51 UTC+13 monmul wrote: >> >>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>> pi@WeatherPi:~ $ wee_device --clear-memory >>> Using configuration file /etc/weewx/weewx.conf >>> Using Vantage driver version 3.2.1 (weewx.drivers.vantage) >>> Proceeding will erase all archive records. >>> Are you sure you wish to proceed (y/n)? y >>> Erasing all archive records ... >>> Archive records erased. >>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0 >>> >>> >>> Welcome to minicom 2.7 >>> >>> OPTIONS: I18n >>> Compiled on Apr 22 2017, 09:14:19. >>> Port /dev/ttyUSB0, 12:49:30 >>> >>> Press CTRL-A Z for help on special keys >>> . >>> . >>> . >>> >>> >>> Again no return of TEST or NVER >>> >>> On Friday, 12 March 2021 at 12:46:43 UTC+13 monmul wrote: >>> >>>> So, having put the old Envoy back on the Rpi (having shown it worked on >>>> the PC) this is what I get....looks like some kind of continuous Loop >>>> situation. >>>> >>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0 >>>> >>>> >>>> >>>> Welcome to minicom 2.7 >>>> >>>> OPTIONS: I18n >>>> Compiled on Apr 22 2017, 09:14:19. >>>> Port /dev/ttyUSB0, 12:42:51 >>>> >>>> Press CTRL-A Z for help on special keys >>>> >>>> LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ b 2 >>>> v)LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ b 2 >>>> ULOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> ¾LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> ±LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> «LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> «LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> ¾—LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> ¾—LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> ³˜LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> ]eLOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> Á LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> >>>> >>>> ¤LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>> âYLOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5⊑? ÿÿÿÿÿÿÿ½ b 2 >>>> ¾LOO1 =vŠ 4I Áÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ >>>> >>>> On Friday, 12 March 2021 at 12:40:56 UTC+13 monmul wrote: >>>> >>>>> But from the tests on my PC, it seems the old Envoy is working....does >>>>> it not.(so we do not have to worry about the new Envoy for now!)...so it >>>>> would appear as if the RPi is the culpit....have I deducted correctly? >>>>> >>>>> On Friday, 12 March 2021 at 02:29:03 UTC+13 tke...@gmail.com wrote: >>>>> >>>>>> They did, but it was about 7 or 8 years ago. >>>>>> >>>>>> You really need to call Davis. >>>>>> >>>>>> On Wed, Mar 10, 2021 at 7:22 PM Graham Eddy <graha...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> i do recall that davis introduced an incompatability between old >>>>>>> firmware and new datalogger but i don’t recall the details. i’m sure a >>>>>>> search of the forum archive would see if that was relevant >>>>>>> >>>>>>> On 11 Mar 2021, at 2:17 pm, monmul <dunb...@gmail.com> wrote: >>>>>>> >>>>>>> Yes I am using the original data logger and cable that came with the >>>>>>> old Envoy....I take out the data logger from he old one and put it in >>>>>>> the >>>>>>> new one...I suspect that the data logger may not be compatible with the >>>>>>> new >>>>>>> Envoy >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3ac1916c-cad6-4821-bbb6-5b8b80ef2866n%40googlegroups.com.
