So you are back using the original Envoy that was 'tripping the fuse'? Regards the two beeps from the Envoy I understand the first indicates successful startup of the processor and the second verifies the installation of the logger so it seems your single beep does point to an issue with the logger. Given you have things working again it might be worthwhile contacting Davis in slower time and finding out if you do have an incompatible Envoy/logger or if there is some other issue with one or the other. If your original Envoy just started working again it could just as easily stop as well; having a backup would be handy.
Gary On Saturday, 13 March 2021 at 10:38:16 UTC+10 monmul wrote: > A big THANK YOU to all who helped me out on this, I really appreciate the > help and guidance....sorry it turned into a wild goose chase! > > On Friday, 12 March 2021 at 16:24:28 UTC+13 monmul wrote: > >> Yep fully functional again....updating on the website...WTF!.....are >> these things sent to us to just test our patience!! >> >> On Friday, 12 March 2021 at 13:30:30 UTC+13 monmul wrote: >> >>> Hmmm! even more curiouser....I notice from my webpage that data was >>> collected and posted yesterday....after having nothing updated for almost 2 >>> weeks! >>> >>> On Friday, 12 March 2021 at 13:06:27 UTC+13 monmul wrote: >>> >>>> So, if it is the RPi then it is either a sofward corruption on the card >>>> caused by the repeated rebooting after the fuse trips....or else some >>>> hardward failure on the board was the cause of the tripping. Its strange >>>> that since reassembling the Envoy, RPi etc there has not been a fuse trip. >>>> >>>> One other thought occurs to me...I have a powered USB Hub attached to >>>> the RPi(its a 3B)....maybe I should disconnect the hub and try the Envoy >>>> directly into the RPi......if minicom works that would point to the Hub as >>>> being the culpit....!!?? >>>> >>>> On Friday, 12 March 2021 at 12:51:51 UTC+13 monmul wrote: >>>> >>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>> pi@WeatherPi:~ $ wee_device --clear-memory >>>>> Using configuration file /etc/weewx/weewx.conf >>>>> Using Vantage driver version 3.2.1 (weewx.drivers.vantage) >>>>> Proceeding will erase all archive records. >>>>> Are you sure you wish to proceed (y/n)? y >>>>> Erasing all archive records ... >>>>> Archive records erased. >>>>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0 >>>>> >>>>> >>>>> Welcome to minicom 2.7 >>>>> >>>>> OPTIONS: I18n >>>>> Compiled on Apr 22 2017, 09:14:19. >>>>> Port /dev/ttyUSB0, 12:49:30 >>>>> >>>>> Press CTRL-A Z for help on special keys >>>>> . >>>>> . >>>>> . >>>>> >>>>> >>>>> Again no return of TEST or NVER >>>>> >>>>> On Friday, 12 March 2021 at 12:46:43 UTC+13 monmul wrote: >>>>> >>>>>> So, having put the old Envoy back on the Rpi (having shown it worked >>>>>> on the PC) this is what I get....looks like some kind of continuous Loop >>>>>> situation. >>>>>> >>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>> pi@WeatherPi:~ $ sudo minicom -b 19200 -D /dev/ttyUSB0 >>>>>> >>>>>> >>>>>> >>>>>> Welcome to minicom 2.7 >>>>>> >>>>>> OPTIONS: I18n >>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>> Port /dev/ttyUSB0, 12:42:51 >>>>>> >>>>>> Press CTRL-A Z for help on special keys >>>>>> >>>>>> LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ b 2 >>>>>> v)LOO1 =vˆ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ b 2 >>>>>> ULOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> ¾LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> ±LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> «LOO1 =vŠ 4H ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> «LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> ¾—LOO1 =vŠ 4H ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> ¾—LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> ³˜LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> /‚LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> ]eLOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> Á LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> Á LOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> ³˜LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> /‚LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> >>>>>> >>>>>> ¤LOO1 =vŠ 4I ÀÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5‘? ÿÿÿÿÿÿÿ½ b 2 >>>>>> âYLOO1 =vŠ 4I ÁÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPÿÿÿÿÿÿÿÿÿ 5⊑? ÿÿÿÿÿÿÿ½ b 2 >>>>>> ¾LOO1 =vŠ 4I Áÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ >>>>>> >>>>>> On Friday, 12 March 2021 at 12:40:56 UTC+13 monmul wrote: >>>>>> >>>>>>> But from the tests on my PC, it seems the old Envoy is >>>>>>> working....does it not.(so we do not have to worry about the new Envoy >>>>>>> for >>>>>>> now!)...so it would appear as if the RPi is the culpit....have I >>>>>>> deducted >>>>>>> correctly? >>>>>>> >>>>>>> On Friday, 12 March 2021 at 02:29:03 UTC+13 [email protected] wrote: >>>>>>> >>>>>>>> They did, but it was about 7 or 8 years ago. >>>>>>>> >>>>>>>> You really need to call Davis. >>>>>>>> >>>>>>>> On Wed, Mar 10, 2021 at 7:22 PM Graham Eddy <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> i do recall that davis introduced an incompatability between old >>>>>>>>> firmware and new datalogger but i don’t recall the details. i’m sure >>>>>>>>> a >>>>>>>>> search of the forum archive would see if that was relevant >>>>>>>>> >>>>>>>>> On 11 Mar 2021, at 2:17 pm, monmul <[email protected]> wrote: >>>>>>>>> >>>>>>>>> Yes I am using the original data logger and cable that came with >>>>>>>>> the old Envoy....I take out the data logger from he old one and put >>>>>>>>> it in >>>>>>>>> the new one...I suspect that the data logger may not be compatible >>>>>>>>> with the >>>>>>>>> new Envoy >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/A4FF1391-8844-4E16-8B1D-C2F6C6F06A3B%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f4435558-a6d4-4c06-a2f7-7d85b7644e0an%40googlegroups.com.
