first of all thank you so much for answering me. I was wrong in
transcribing the syslog.
this is correct: {"time": "2022-08-07 13:26:39", "model":
"Fineoffset-WHx080", "subtype": 2, "uv_sensor_id": 225, "uv_status": " OK
"," uv_index ": 2," lux ": 32082.000," wm ": 46,972," mic ":" CRC "}
I'll try your suggestions and post them here
Il giorno lunedì 8 agosto 2022 alle 09:18:08 UTC+2 [email protected] ha
scritto:
> I've never seen "*End*offset-WHx080", not sure if this is available in
> sdr.py, but maybe I'm wrong.
>
> Mine works with following sensor map entries:
>
> UV = uv_index.*.FOWHx080Packet
> radiation = light.*.FOWHx080Packet
>
> You can replace *** with your ID (necessary if there are other WHx080
> stations around)
>
>
> [email protected] schrieb am Sonntag, 7. August 2022 um 15:45:17 UTC+2:
>
>> I used a weeewx 4.8.0 installation using the weewx-sdr driver updated on
>> February 12th of this year and capturing the sensors at 433 mhz with a
>> Nesdr key;
>> the sdr.py file is from January 22nd
>>
>> Il giorno domenica 7 agosto 2022 alle 15:32:29 UTC+2 Peppe ha scritto:
>>
>>> Hello everyone, I ask you for a little help to insert the uv and
>>> radiation sensors of a whx080 station into my sensor map.
>>> Here is the result of the sudo rtl_433 -M utc -F json command:
>>>
>>> {"time": "2022-08-07 13:26:39", "model": "Endoffset-WHx080", "subtype":
>>> 2, "uv_sensor_id": 225, "uv_status": "OK", "uv_index ": 2," lux ":
>>> 32082.000," wm ": 46,972," mic ":" CRC "}
>>>
>>> What is the right line to insert within the weewx.conf sensor map?
>>> thanks for your cooperation and sorry for my bad english
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/e67461ea-3e02-4979-afd2-7191a4cfc043n%40googlegroups.com.
