Just out of interest: why are you using the TFA/Hideki Sensor for wind, instead of the WH3080? As far as I know, the TFA samples wind gusts much slower, about 11 seconds, resulting in too low wind gust readings. Compared to the 1 second sampling of the WHx080 models (fastest gust out of 48x1s is then sent every 48s).
[email protected] schrieb am Mittwoch, 17. August 2022 um 14:10:00 UTC+2: > I just realized it never worked with my WHx080 too (only the usb instance) > as I use the radiation from the WH65 in my SDR setup. A quick look into > sdr.py reveals why: There is no parsing of uv data for class > FOWHx080Packet(Packet) - Only for class FOWH3080Packet(Packet) > > First, make a backup of your sdr.py, then try changing > IDENTIFIER = "Fine Offset Electronics WH3080 Weather Station" > to > IDENTIFIER = "Fineoffset-WHx080" > > and see if it works. You might have to use FOWH3080Packet in the sensor > map, or maybe add > > return Packet.add_identifiers(pkt, station_id, FOWHx080Packet.__name__) > > to @staticmethod in class FOWH3080Packet(Packet): > > But first, try with just the identifier change. > > I'll update the Issue you created in > https://github.com/matthewwall/weewx-sdr/issues/162 > Maybe someone can add it to the weewx-sdr driver > > [email protected] schrieb am Dienstag, 16. August 2022 um 18:01:31 UTC+2: > >> >> I use 2 other sensors >> one is tfa wind and the other is acurite lightning sensor >> I don't use the wind sensor of the wh3080 >> my skin inside the current.inc the right strings of UV and radiation but >> the result is UV N / A and radiation N / A >> Il giorno martedì 16 agosto 2022 alle 17:46:27 UTC+2 Peppe ha scritto: >> >>> good evening, >>> I will try first of all to put order and to answer your questions: >>> the weather station is a froggit wh3080 with separate sensors at 433 >>> mhz, therefore the old model. Here is the photo in jpg >>> >>> [image: Profi-radio-Stazione-Meteo-wh3080-luce-UV-USB.jpg] >>> IThis is the result of what the stick sees thanks to the rtl command: >>> sudo rtl_433 -R 32 >>> >>> time : 2022-08-16 17:20:15 >>> model : Fineoffset-WHx080 Msg type : 0 >>> Station ID: 226 >>> Battery : 1 Temperature: 32.9 C Humidity : 36 % >>> Wind Direction: 0 Wind avg speed: 0.00 Wind gust : 0.00 >>> Total rainfall: 65.1 Integrity : CRC >>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>> _ _ _ _ >>> time : 2022-08-16 17:20:27 >>> model : Fineoffset-WHx080 Msg type : 2 >>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>> _ _ _ _ >>> time : 2022-08-16 17:20:27 >>> model : Fineoffset-WHx080 Msg type : 2 >>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>> _ _ _ _ >>> time : 2022-08-16 17:20:27 >>> model : Fineoffset-WHx080 Msg type : 2 >>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>> >>> the command lines inserted in the sdr: >>> driver = user.sdr >>> cmd = rtl_433 -R 32 -R 40 -R 42 >>> the command lines inserted in the sensor map >>> UV = uv_index.225.FOWH3080Packet >>> radiation = radiation.225.FOWH3080Packet >>> also replaced by another entry >>> UV = uv_index.225.FOWHx080Packet >>> radiation = radiation.225.FOWHx3080Packet >>> >>> finally this is the result of the driver weewx sdr using the command >>> PYTHONPATH=/home/weewx/bin python /home/weewx/bin/user/sdr.py --config >>> /home/weewx/weewx.conf --hide=parsed,mapped >>> >>> out: ['{"time" : "2022-08-16 15:40:27", "model" : "Fineoffset-WHx080", >>> "subtype" : 2, "uv_sensor_id" : 225, "uv_status" : "OK", "uv_index" : 3, >>> "lux" : 66370.100, "wm" : 97.174, "mic" : "CRC"}\n', '{"time" : "2022-08-16 >>> 15:40:27", "model" : "Fineoffset-WHx080", "subtype" : 2, "uv_sensor_id" : >>> 225, "uv_status" : "OK", "uv_index" : 3, "lux" : 66370.100, "wm" : 97.174, >>> "mic" : "CRC"}\n', '{"time" : "2022-08-16 15:40:27", "model" : >>> "Fineoffset-WHx080", "subtype" : 2, "uv_sensor_id" : 225, "uv_status" : >>> "OK", "uv_index" : 3, "lux" : 66370.100, "wm" : 97.174, "mic" : "CRC"}\n'] >>> >>> >>> inside the syslog there is no trace of UV or radiation >>> >>> >>>> I currently don't have it in front of me and am just writing from my >>>> phone, but maybe i can give a few hints: >>>> >>>> Which sdr command do you use in your config file? Try adding: >>>> >>>> -Y classic >>>> >>>> Which WHx080 model do you have? Is it the old one with separated >>>> sensors or the newer all in one sensor array? >>>> >>>> Do the other sensors work with your sdr weewx conf? >>>> >>>> Please keep in mind, the whx080 never really gave accurate solar >>>> radiation readings in the first place, mine showed 600 instead of 900 w/m2 >>>> last month. The newer wh65 array does this a lot better imo (but worse for >>>> wind gusts instead..) >>>> >>>> You will have to add in stdCalibrate -> Corrections >>>> >>>> radiation = radiation/126.7 >>>> >>>> To convert the lux illuminance to w/m2 radiation readings. >>>> >>>> There is a way to show the recorded loop packets in the terminal but i >>>> can't remember the command, if you find it, check and see if weewx is >>>> getting the data. If so, make sure the uv and radiation fields exist in >>>> your database, and whether or not they are listed in your skin.conf (for >>>> plots as well as the current values) >>>> >>>> >>>> >>>> [email protected] schrieb am Sonntag, 14. August 2022 um 14:14:29 >>>> UTC+2: >>>> >>>>> can anyone help me? >>>>> >>>>> Il giorno martedì 9 agosto 2022 alle 16:49:48 UTC+2 Peppe ha scritto: >>>>> >>>>>> sorry, the last line is wrong >>>>>> this is what I wanted to write >>>>>> radiation = radiation.225.FOWH3080Packet >>>>>> >>>>>> Il giorno mar 9 ago 2022 alle ore 16:46 Peppe <[email protected]> >>>>>> ha scritto: >>>>>> >>>>>>> good evening >>>>>>> I put the two lines on the sensor map but it doesn't work. I am >>>>>>> writing you a series of attempts made by me along with your suggestions: >>>>>>> UV = uv_index.225.FOWHx080Packet >>>>>>> radiation = light.225.FOWHx080Packet >>>>>>> radiation = radiation.225.FOWHx080Packet >>>>>>> UV = uv_index.225.FOWH3080Packet >>>>>>> radiation = light.225.FOWH3080Packet >>>>>>> radiation = light.225.FOWH3080Packet >>>>>>> I don't know what I did wrong. >>>>>>> I rewrite the data I receive from my Nesdr: >>>>>>> {"time": "2022-08-09 14:42:36", "model": "Fineoffset-WHx080", >>>>>>> "subtype": 2, "uv_sensor_id": 225, "uv_status": "OK", "uv_index ": 3," >>>>>>> lux >>>>>>> ": 36888.800," wm ": 54.010," mic ":" CRC "} >>>>>>> >>>>>>> Il giorno lun 8 ago 2022 alle ore 16:44 Peppe <[email protected]> >>>>>>> ha scritto: >>>>>>> >>>>>>>> >>>>>>>> first of all thank you so much for answering me. I was wrong in >>>>>>>> transcribing the syslog. >>>>>>>> this is correct: {"time": "2022-08-07 13:26:39", "model": >>>>>>>> "Fineoffset-WHx080", "subtype": 2, "uv_sensor_id": 225, "uv_status": " >>>>>>>> OK >>>>>>>> "," uv_index ": 2," lux ": 32082.000," wm ": 46,972," mic ":" CRC "} >>>>>>>> I'll try your suggestions and post them here >>>>>>>> >>>>>>>> Il giorno lunedì 8 agosto 2022 alle 09:18:08 UTC+2 [email protected] >>>>>>>> ha scritto: >>>>>>>> >>>>>>>>> I've never seen "*End*offset-WHx080", not sure if this is >>>>>>>>> available in sdr.py, but maybe I'm wrong. >>>>>>>>> >>>>>>>>> Mine works with following sensor map entries: >>>>>>>>> >>>>>>>>> UV = uv_index.*.FOWHx080Packet >>>>>>>>> radiation = light.*.FOWHx080Packet >>>>>>>>> >>>>>>>>> You can replace *** with your ID (necessary if there are other >>>>>>>>> WHx080 stations around) >>>>>>>>> >>>>>>>>> >>>>>>>>> [email protected] schrieb am Sonntag, 7. August 2022 um 15:45:17 >>>>>>>>> UTC+2: >>>>>>>>> >>>>>>>>>> I used a weeewx 4.8.0 installation using the weewx-sdr driver >>>>>>>>>> updated on February 12th of this year and capturing the sensors at >>>>>>>>>> 433 mhz >>>>>>>>>> with a Nesdr key; >>>>>>>>>> the sdr.py file is from January 22nd >>>>>>>>>> >>>>>>>>>> Il giorno domenica 7 agosto 2022 alle 15:32:29 UTC+2 Peppe ha >>>>>>>>>> scritto: >>>>>>>>>> >>>>>>>>>>> Hello everyone, I ask you for a little help to insert the uv and >>>>>>>>>>> radiation sensors of a whx080 station into my sensor map. >>>>>>>>>>> Here is the result of the sudo rtl_433 -M utc -F json command: >>>>>>>>>>> >>>>>>>>>>> {"time": "2022-08-07 13:26:39", "model": "Endoffset-WHx080", >>>>>>>>>>> "subtype": 2, "uv_sensor_id": 225, "uv_status": "OK", "uv_index ": >>>>>>>>>>> 2," lux >>>>>>>>>>> ": 32082.000," wm ": 46,972," mic ":" CRC "} >>>>>>>>>>> >>>>>>>>>>> What is the right line to insert within the weewx.conf sensor >>>>>>>>>>> map? >>>>>>>>>>> thanks for your cooperation and sorry for my bad english >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>> the Google Groups "weewx-user" group. >>>>>>>> To unsubscribe from this topic, visit >>>>>>>> https://groups.google.com/d/topic/weewx-user/PohR3wcR1UM/unsubscribe >>>>>>>> . >>>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>>> [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/e67461ea-3e02-4979-afd2-7191a4cfc043n%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e67461ea-3e02-4979-afd2-7191a4cfc043n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-user" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/weewx-user/PohR3wcR1UM/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/11d088ca-4d0d-4979-9558-9dbdab25bf7dn%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/11d088ca-4d0d-4979-9558-9dbdab25bf7dn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b0bcc77b-3d4a-4928-b455-785c1fd771een%40googlegroups.com.
