Seems solved on github, does it work good? Now, how are your experiences with the TFA/Hideki Anemometer compared to the WH3080 Anemometer?
[email protected] schrieb am Donnerstag, 18. August 2022 um 15:41:41 UTC+2: > as soon as we have solved the uv problem we will talk about it again > > Il giorno giovedì 18 agosto 2022 alle 03:47:20 UTC+2 [email protected] ha > scritto: > >> Just out of interest: why are you using the TFA/Hideki Sensor for wind, >> instead of the WH3080? As far as I know, the TFA samples wind gusts much >> slower, about 11 seconds, resulting in too low wind gust readings. Compared >> to the 1 second sampling of the WHx080 models (fastest gust out of 48x1s is >> then sent every 48s). >> >> [email protected] schrieb am Mittwoch, 17. August 2022 um 14:10:00 UTC+2: >> >>> I just realized it never worked with my WHx080 too (only the usb >>> instance) as I use the radiation from the WH65 in my SDR setup. A quick >>> look into sdr.py reveals why: There is no parsing of uv data for class >>> FOWHx080Packet(Packet) - Only for class FOWH3080Packet(Packet) >>> >>> First, make a backup of your sdr.py, then try changing >>> IDENTIFIER = "Fine Offset Electronics WH3080 Weather Station" >>> to >>> IDENTIFIER = "Fineoffset-WHx080" >>> >>> and see if it works. You might have to use FOWH3080Packet in the sensor >>> map, or maybe add >>> >>> return Packet.add_identifiers(pkt, station_id, FOWHx080Packet.__name__) >>> >>> to @staticmethod in class FOWH3080Packet(Packet): >>> >>> But first, try with just the identifier change. >>> >>> I'll update the Issue you created in >>> https://github.com/matthewwall/weewx-sdr/issues/162 >>> Maybe someone can add it to the weewx-sdr driver >>> >>> [email protected] schrieb am Dienstag, 16. August 2022 um 18:01:31 >>> UTC+2: >>> >>>> >>>> I use 2 other sensors >>>> one is tfa wind and the other is acurite lightning sensor >>>> I don't use the wind sensor of the wh3080 >>>> my skin inside the current.inc the right strings of UV and radiation >>>> but the result is UV N / A and radiation N / A >>>> Il giorno martedì 16 agosto 2022 alle 17:46:27 UTC+2 Peppe ha scritto: >>>> >>>>> good evening, >>>>> I will try first of all to put order and to answer your questions: >>>>> the weather station is a froggit wh3080 with separate sensors at 433 >>>>> mhz, therefore the old model. Here is the photo in jpg >>>>> >>>>> [image: Profi-radio-Stazione-Meteo-wh3080-luce-UV-USB.jpg] >>>>> IThis is the result of what the stick sees thanks to the rtl command: >>>>> sudo rtl_433 -R 32 >>>>> >>>>> time : 2022-08-16 17:20:15 >>>>> model : Fineoffset-WHx080 Msg type : 0 >>>>> Station ID: 226 >>>>> Battery : 1 Temperature: 32.9 C Humidity : 36 % >>>>> Wind Direction: 0 Wind avg speed: 0.00 Wind gust : 0.00 >>>>> Total rainfall: 65.1 Integrity : CRC >>>>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>>>> _ _ _ _ _ >>>>> time : 2022-08-16 17:20:27 >>>>> model : Fineoffset-WHx080 Msg type : 2 >>>>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>>>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>>>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>>>> _ _ _ _ _ >>>>> time : 2022-08-16 17:20:27 >>>>> model : Fineoffset-WHx080 Msg type : 2 >>>>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>>>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>>>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>>>> _ _ _ _ _ >>>>> time : 2022-08-16 17:20:27 >>>>> model : Fineoffset-WHx080 Msg type : 2 >>>>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>>>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>>>> >>>>> the command lines inserted in the sdr: >>>>> driver = user.sdr >>>>> cmd = rtl_433 -R 32 -R 40 -R 42 >>>>> the command lines inserted in the sensor map >>>>> UV = uv_index.225.FOWH3080Packet >>>>> radiation = radiation.225.FOWH3080Packet >>>>> also replaced by another entry >>>>> UV = uv_index.225.FOWHx080Packet >>>>> radiation = radiation.225.FOWHx3080Packet >>>>> >>>>> finally this is the result of the driver weewx sdr using the command >>>>> PYTHONPATH=/home/weewx/bin python /home/weewx/bin/user/sdr.py --config >>>>> /home/weewx/weewx.conf --hide=parsed,mapped >>>>> >>>>> out: ['{"time" : "2022-08-16 15:40:27", "model" : >>>>> "Fineoffset-WHx080", "subtype" : 2, "uv_sensor_id" : 225, "uv_status" : >>>>> "OK", "uv_index" : 3, "lux" : 66370.100, "wm" : 97.174, "mic" : >>>>> "CRC"}\n', >>>>> '{"time" : "2022-08-16 15:40:27", "model" : "Fineoffset-WHx080", >>>>> "subtype" >>>>> : 2, "uv_sensor_id" : 225, "uv_status" : "OK", "uv_index" : 3, "lux" : >>>>> 66370.100, "wm" : 97.174, "mic" : "CRC"}\n', '{"time" : "2022-08-16 >>>>> 15:40:27", "model" : "Fineoffset-WHx080", "subtype" : 2, "uv_sensor_id" : >>>>> 225, "uv_status" : "OK", "uv_index" : 3, "lux" : 66370.100, "wm" : >>>>> 97.174, >>>>> "mic" : "CRC"}\n'] >>>>> >>>>> >>>>> inside the syslog there is no trace of UV or radiation >>>>> >>>>> >>>>>> I currently don't have it in front of me and am just writing from my >>>>>> phone, but maybe i can give a few hints: >>>>>> >>>>>> Which sdr command do you use in your config file? Try adding: >>>>>> >>>>>> -Y classic >>>>>> >>>>>> Which WHx080 model do you have? Is it the old one with separated >>>>>> sensors or the newer all in one sensor array? >>>>>> >>>>>> Do the other sensors work with your sdr weewx conf? >>>>>> >>>>>> Please keep in mind, the whx080 never really gave accurate solar >>>>>> radiation readings in the first place, mine showed 600 instead of 900 >>>>>> w/m2 >>>>>> last month. The newer wh65 array does this a lot better imo (but worse >>>>>> for >>>>>> wind gusts instead..) >>>>>> >>>>>> You will have to add in stdCalibrate -> Corrections >>>>>> >>>>>> radiation = radiation/126.7 >>>>>> >>>>>> To convert the lux illuminance to w/m2 radiation readings. >>>>>> >>>>>> There is a way to show the recorded loop packets in the terminal but >>>>>> i can't remember the command, if you find it, check and see if weewx is >>>>>> getting the data. If so, make sure the uv and radiation fields exist in >>>>>> your database, and whether or not they are listed in your skin.conf (for >>>>>> plots as well as the current values) >>>>>> >>>>>> >>>>>> >>>>>> [email protected] schrieb am Sonntag, 14. August 2022 um 14:14:29 >>>>>> UTC+2: >>>>>> >>>>>>> can anyone help me? >>>>>>> >>>>>>> Il giorno martedì 9 agosto 2022 alle 16:49:48 UTC+2 Peppe ha scritto: >>>>>>> >>>>>>>> sorry, the last line is wrong >>>>>>>> this is what I wanted to write >>>>>>>> radiation = radiation.225.FOWH3080Packet >>>>>>>> >>>>>>>> Il giorno mar 9 ago 2022 alle ore 16:46 Peppe <[email protected]> >>>>>>>> ha scritto: >>>>>>>> >>>>>>>>> good evening >>>>>>>>> I put the two lines on the sensor map but it doesn't work. I am >>>>>>>>> writing you a series of attempts made by me along with your >>>>>>>>> suggestions: >>>>>>>>> UV = uv_index.225.FOWHx080Packet >>>>>>>>> radiation = light.225.FOWHx080Packet >>>>>>>>> radiation = radiation.225.FOWHx080Packet >>>>>>>>> UV = uv_index.225.FOWH3080Packet >>>>>>>>> radiation = light.225.FOWH3080Packet >>>>>>>>> radiation = light.225.FOWH3080Packet >>>>>>>>> I don't know what I did wrong. >>>>>>>>> I rewrite the data I receive from my Nesdr: >>>>>>>>> {"time": "2022-08-09 14:42:36", "model": "Fineoffset-WHx080", >>>>>>>>> "subtype": 2, "uv_sensor_id": 225, "uv_status": "OK", "uv_index ": >>>>>>>>> 3," lux >>>>>>>>> ": 36888.800," wm ": 54.010," mic ":" CRC "} >>>>>>>>> >>>>>>>>> Il giorno lun 8 ago 2022 alle ore 16:44 Peppe <[email protected]> >>>>>>>>> ha scritto: >>>>>>>>> >>>>>>>>>> >>>>>>>>>> first of all thank you so much for answering me. I was wrong in >>>>>>>>>> transcribing the syslog. >>>>>>>>>> this is correct: {"time": "2022-08-07 13:26:39", "model": >>>>>>>>>> "Fineoffset-WHx080", "subtype": 2, "uv_sensor_id": 225, "uv_status": >>>>>>>>>> " OK >>>>>>>>>> "," uv_index ": 2," lux ": 32082.000," wm ": 46,972," mic ":" CRC "} >>>>>>>>>> I'll try your suggestions and post them here >>>>>>>>>> >>>>>>>>>> Il giorno lunedì 8 agosto 2022 alle 09:18:08 UTC+2 >>>>>>>>>> [email protected] ha scritto: >>>>>>>>>> >>>>>>>>>>> I've never seen "*End*offset-WHx080", not sure if this is >>>>>>>>>>> available in sdr.py, but maybe I'm wrong. >>>>>>>>>>> >>>>>>>>>>> Mine works with following sensor map entries: >>>>>>>>>>> >>>>>>>>>>> UV = uv_index.*.FOWHx080Packet >>>>>>>>>>> radiation = light.*.FOWHx080Packet >>>>>>>>>>> >>>>>>>>>>> You can replace *** with your ID (necessary if there are other >>>>>>>>>>> WHx080 stations around) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> [email protected] schrieb am Sonntag, 7. August 2022 um >>>>>>>>>>> 15:45:17 UTC+2: >>>>>>>>>>> >>>>>>>>>>>> I used a weeewx 4.8.0 installation using the weewx-sdr driver >>>>>>>>>>>> updated on February 12th of this year and capturing the sensors at >>>>>>>>>>>> 433 mhz >>>>>>>>>>>> with a Nesdr key; >>>>>>>>>>>> the sdr.py file is from January 22nd >>>>>>>>>>>> >>>>>>>>>>>> Il giorno domenica 7 agosto 2022 alle 15:32:29 UTC+2 Peppe ha >>>>>>>>>>>> scritto: >>>>>>>>>>>> >>>>>>>>>>>>> Hello everyone, I ask you for a little help to insert the uv >>>>>>>>>>>>> and radiation sensors of a whx080 station into my sensor map. >>>>>>>>>>>>> Here is the result of the sudo rtl_433 -M utc -F json command: >>>>>>>>>>>>> >>>>>>>>>>>>> {"time": "2022-08-07 13:26:39", "model": "Endoffset-WHx080", >>>>>>>>>>>>> "subtype": 2, "uv_sensor_id": 225, "uv_status": "OK", "uv_index >>>>>>>>>>>>> ": 2," lux >>>>>>>>>>>>> ": 32082.000," wm ": 46,972," mic ":" CRC "} >>>>>>>>>>>>> >>>>>>>>>>>>> What is the right line to insert within the weewx.conf sensor >>>>>>>>>>>>> map? >>>>>>>>>>>>> thanks for your cooperation and sorry for my bad english >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to a topic >>>>>>>>>> in the Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>> https://groups.google.com/d/topic/weewx-user/PohR3wcR1UM/unsubscribe >>>>>>>>>> . >>>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>>> to [email protected]. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e67461ea-3e02-4979-afd2-7191a4cfc043n%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e67461ea-3e02-4979-afd2-7191a4cfc043n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "weewx-user" group. >>>>>> To unsubscribe from this topic, visit >>>>>> https://groups.google.com/d/topic/weewx-user/PohR3wcR1UM/unsubscribe. >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/11d088ca-4d0d-4979-9558-9dbdab25bf7dn%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/11d088ca-4d0d-4979-9558-9dbdab25bf7dn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2b487e05-ba32-4c0f-90eb-ccbf17e3a5acn%40googlegroups.com.
