as soon as we have solved the uv problem we will talk about it again Il giorno giovedì 18 agosto 2022 alle 03:47:20 UTC+2 [email protected] ha scritto:
> Just out of interest: why are you using the TFA/Hideki Sensor for wind, > instead of the WH3080? As far as I know, the TFA samples wind gusts much > slower, about 11 seconds, resulting in too low wind gust readings. Compared > to the 1 second sampling of the WHx080 models (fastest gust out of 48x1s is > then sent every 48s). > > [email protected] schrieb am Mittwoch, 17. August 2022 um 14:10:00 UTC+2: > >> I just realized it never worked with my WHx080 too (only the usb >> instance) as I use the radiation from the WH65 in my SDR setup. A quick >> look into sdr.py reveals why: There is no parsing of uv data for class >> FOWHx080Packet(Packet) - Only for class FOWH3080Packet(Packet) >> >> First, make a backup of your sdr.py, then try changing >> IDENTIFIER = "Fine Offset Electronics WH3080 Weather Station" >> to >> IDENTIFIER = "Fineoffset-WHx080" >> >> and see if it works. You might have to use FOWH3080Packet in the sensor >> map, or maybe add >> >> return Packet.add_identifiers(pkt, station_id, FOWHx080Packet.__name__) >> >> to @staticmethod in class FOWH3080Packet(Packet): >> >> But first, try with just the identifier change. >> >> I'll update the Issue you created in >> https://github.com/matthewwall/weewx-sdr/issues/162 >> Maybe someone can add it to the weewx-sdr driver >> >> [email protected] schrieb am Dienstag, 16. August 2022 um 18:01:31 >> UTC+2: >> >>> >>> I use 2 other sensors >>> one is tfa wind and the other is acurite lightning sensor >>> I don't use the wind sensor of the wh3080 >>> my skin inside the current.inc the right strings of UV and radiation but >>> the result is UV N / A and radiation N / A >>> Il giorno martedì 16 agosto 2022 alle 17:46:27 UTC+2 Peppe ha scritto: >>> >>>> good evening, >>>> I will try first of all to put order and to answer your questions: >>>> the weather station is a froggit wh3080 with separate sensors at 433 >>>> mhz, therefore the old model. Here is the photo in jpg >>>> >>>> [image: Profi-radio-Stazione-Meteo-wh3080-luce-UV-USB.jpg] >>>> IThis is the result of what the stick sees thanks to the rtl command: >>>> sudo rtl_433 -R 32 >>>> >>>> time : 2022-08-16 17:20:15 >>>> model : Fineoffset-WHx080 Msg type : 0 >>>> Station ID: 226 >>>> Battery : 1 Temperature: 32.9 C Humidity : 36 % >>>> Wind Direction: 0 Wind avg speed: 0.00 Wind gust : 0.00 >>>> Total rainfall: 65.1 Integrity : CRC >>>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>>> _ _ _ _ >>>> time : 2022-08-16 17:20:27 >>>> model : Fineoffset-WHx080 Msg type : 2 >>>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>>> _ _ _ _ >>>> time : 2022-08-16 17:20:27 >>>> model : Fineoffset-WHx080 Msg type : 2 >>>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>>> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ >>>> _ _ _ _ >>>> time : 2022-08-16 17:20:27 >>>> model : Fineoffset-WHx080 Msg type : 2 >>>> UV Sensor ID: 225 Sensor Status: OK UV Index : 4 >>>> Lux : 84102.8 Watts/m : 123.14 Integrity : CRC >>>> >>>> the command lines inserted in the sdr: >>>> driver = user.sdr >>>> cmd = rtl_433 -R 32 -R 40 -R 42 >>>> the command lines inserted in the sensor map >>>> UV = uv_index.225.FOWH3080Packet >>>> radiation = radiation.225.FOWH3080Packet >>>> also replaced by another entry >>>> UV = uv_index.225.FOWHx080Packet >>>> radiation = radiation.225.FOWHx3080Packet >>>> >>>> finally this is the result of the driver weewx sdr using the command >>>> PYTHONPATH=/home/weewx/bin python /home/weewx/bin/user/sdr.py --config >>>> /home/weewx/weewx.conf --hide=parsed,mapped >>>> >>>> out: ['{"time" : "2022-08-16 15:40:27", "model" : "Fineoffset-WHx080", >>>> "subtype" : 2, "uv_sensor_id" : 225, "uv_status" : "OK", "uv_index" : 3, >>>> "lux" : 66370.100, "wm" : 97.174, "mic" : "CRC"}\n', '{"time" : >>>> "2022-08-16 >>>> 15:40:27", "model" : "Fineoffset-WHx080", "subtype" : 2, "uv_sensor_id" : >>>> 225, "uv_status" : "OK", "uv_index" : 3, "lux" : 66370.100, "wm" : 97.174, >>>> "mic" : "CRC"}\n', '{"time" : "2022-08-16 15:40:27", "model" : >>>> "Fineoffset-WHx080", "subtype" : 2, "uv_sensor_id" : 225, "uv_status" : >>>> "OK", "uv_index" : 3, "lux" : 66370.100, "wm" : 97.174, "mic" : "CRC"}\n'] >>>> >>>> >>>> inside the syslog there is no trace of UV or radiation >>>> >>>> >>>>> I currently don't have it in front of me and am just writing from my >>>>> phone, but maybe i can give a few hints: >>>>> >>>>> Which sdr command do you use in your config file? Try adding: >>>>> >>>>> -Y classic >>>>> >>>>> Which WHx080 model do you have? Is it the old one with separated >>>>> sensors or the newer all in one sensor array? >>>>> >>>>> Do the other sensors work with your sdr weewx conf? >>>>> >>>>> Please keep in mind, the whx080 never really gave accurate solar >>>>> radiation readings in the first place, mine showed 600 instead of 900 >>>>> w/m2 >>>>> last month. The newer wh65 array does this a lot better imo (but worse >>>>> for >>>>> wind gusts instead..) >>>>> >>>>> You will have to add in stdCalibrate -> Corrections >>>>> >>>>> radiation = radiation/126.7 >>>>> >>>>> To convert the lux illuminance to w/m2 radiation readings. >>>>> >>>>> There is a way to show the recorded loop packets in the terminal but i >>>>> can't remember the command, if you find it, check and see if weewx is >>>>> getting the data. If so, make sure the uv and radiation fields exist in >>>>> your database, and whether or not they are listed in your skin.conf (for >>>>> plots as well as the current values) >>>>> >>>>> >>>>> >>>>> [email protected] schrieb am Sonntag, 14. August 2022 um 14:14:29 >>>>> UTC+2: >>>>> >>>>>> can anyone help me? >>>>>> >>>>>> Il giorno martedì 9 agosto 2022 alle 16:49:48 UTC+2 Peppe ha scritto: >>>>>> >>>>>>> sorry, the last line is wrong >>>>>>> this is what I wanted to write >>>>>>> radiation = radiation.225.FOWH3080Packet >>>>>>> >>>>>>> Il giorno mar 9 ago 2022 alle ore 16:46 Peppe <[email protected]> >>>>>>> ha scritto: >>>>>>> >>>>>>>> good evening >>>>>>>> I put the two lines on the sensor map but it doesn't work. I am >>>>>>>> writing you a series of attempts made by me along with your >>>>>>>> suggestions: >>>>>>>> UV = uv_index.225.FOWHx080Packet >>>>>>>> radiation = light.225.FOWHx080Packet >>>>>>>> radiation = radiation.225.FOWHx080Packet >>>>>>>> UV = uv_index.225.FOWH3080Packet >>>>>>>> radiation = light.225.FOWH3080Packet >>>>>>>> radiation = light.225.FOWH3080Packet >>>>>>>> I don't know what I did wrong. >>>>>>>> I rewrite the data I receive from my Nesdr: >>>>>>>> {"time": "2022-08-09 14:42:36", "model": "Fineoffset-WHx080", >>>>>>>> "subtype": 2, "uv_sensor_id": 225, "uv_status": "OK", "uv_index ": 3," >>>>>>>> lux >>>>>>>> ": 36888.800," wm ": 54.010," mic ":" CRC "} >>>>>>>> >>>>>>>> Il giorno lun 8 ago 2022 alle ore 16:44 Peppe <[email protected]> >>>>>>>> ha scritto: >>>>>>>> >>>>>>>>> >>>>>>>>> first of all thank you so much for answering me. I was wrong in >>>>>>>>> transcribing the syslog. >>>>>>>>> this is correct: {"time": "2022-08-07 13:26:39", "model": >>>>>>>>> "Fineoffset-WHx080", "subtype": 2, "uv_sensor_id": 225, "uv_status": >>>>>>>>> " OK >>>>>>>>> "," uv_index ": 2," lux ": 32082.000," wm ": 46,972," mic ":" CRC "} >>>>>>>>> I'll try your suggestions and post them here >>>>>>>>> >>>>>>>>> Il giorno lunedì 8 agosto 2022 alle 09:18:08 UTC+2 >>>>>>>>> [email protected] ha scritto: >>>>>>>>> >>>>>>>>>> I've never seen "*End*offset-WHx080", not sure if this is >>>>>>>>>> available in sdr.py, but maybe I'm wrong. >>>>>>>>>> >>>>>>>>>> Mine works with following sensor map entries: >>>>>>>>>> >>>>>>>>>> UV = uv_index.*.FOWHx080Packet >>>>>>>>>> radiation = light.*.FOWHx080Packet >>>>>>>>>> >>>>>>>>>> You can replace *** with your ID (necessary if there are other >>>>>>>>>> WHx080 stations around) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> [email protected] schrieb am Sonntag, 7. August 2022 um >>>>>>>>>> 15:45:17 UTC+2: >>>>>>>>>> >>>>>>>>>>> I used a weeewx 4.8.0 installation using the weewx-sdr driver >>>>>>>>>>> updated on February 12th of this year and capturing the sensors at >>>>>>>>>>> 433 mhz >>>>>>>>>>> with a Nesdr key; >>>>>>>>>>> the sdr.py file is from January 22nd >>>>>>>>>>> >>>>>>>>>>> Il giorno domenica 7 agosto 2022 alle 15:32:29 UTC+2 Peppe ha >>>>>>>>>>> scritto: >>>>>>>>>>> >>>>>>>>>>>> Hello everyone, I ask you for a little help to insert the uv >>>>>>>>>>>> and radiation sensors of a whx080 station into my sensor map. >>>>>>>>>>>> Here is the result of the sudo rtl_433 -M utc -F json command: >>>>>>>>>>>> >>>>>>>>>>>> {"time": "2022-08-07 13:26:39", "model": "Endoffset-WHx080", >>>>>>>>>>>> "subtype": 2, "uv_sensor_id": 225, "uv_status": "OK", "uv_index ": >>>>>>>>>>>> 2," lux >>>>>>>>>>>> ": 32082.000," wm ": 46,972," mic ":" CRC "} >>>>>>>>>>>> >>>>>>>>>>>> What is the right line to insert within the weewx.conf sensor >>>>>>>>>>>> map? >>>>>>>>>>>> thanks for your cooperation and sorry for my bad english >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/weewx-user/PohR3wcR1UM/unsubscribe >>>>>>>>> . >>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>> to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e67461ea-3e02-4979-afd2-7191a4cfc043n%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e67461ea-3e02-4979-afd2-7191a4cfc043n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "weewx-user" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/weewx-user/PohR3wcR1UM/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/11d088ca-4d0d-4979-9558-9dbdab25bf7dn%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/11d088ca-4d0d-4979-9558-9dbdab25bf7dn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c49b41b6-7e82-40b7-bff9-f31668c5386dn%40googlegroups.com.
