I have installed my first MT system (RB532 w/daughterboard) and am happy with it but using it only as an ethernet router at this point. It seems to perform better than the Cisco L3 switch (C4840G) we replaced.
But I have not used the Mikrotik for an AP or PtP links. What about Mikrotik performance & channel spacing? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998-5555 541-998-5599 fax ----- Original Message ----- From: "George" <[EMAIL PROTECTED]> To: "WISPA General List" <[email protected]> Sent: Tuesday, April 11, 2006 7:59 AM Subject: Re: [WISPA] Best system for a new WISP > Travis Johnson wrote: > > Hi, > > > > Does anyone know actual TCP throughput with StarOS on their 533mhz > > boards in just a point to point config, using 20mhz of spectrum? > > > > Travis > > Microserv > > > > > Attached is a screen capture from the original 4 port 533 war boards in > a 10MHz mode running a PtP shot. > Notice the rate says 27 rather than 54. > > This is the VX platform based on VX works. Lonnie abandoned that and is > back to Linux > > George > > > ---------------------------------------------------------------------------- ---- ---------------------------------------------------------------------------- ---- > -- > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
