What we do is measure non compressible data and that becomes the
absolute max I will let someone ask for.  That means with compressible
data we do better than they expect.  No harm done, we figure.

Lonnie

On 4/12/06, Tom DeReggi <[EMAIL PROTECTED]> wrote:
> PS.  UDP tests usually need to be run with Dynamic Modulation features
> disabled.
>
> ISPs that delver telco grade services usually need to operate without
> Dynamic moduilation anyway, to consistently guarantee the link capacity
> available to tenants, and set at a speed that can deliver reliabilty
> consistently, in my opinion. I know some orthogon users may differ in
> opinion..
>
> Tom DeReggi
> RapidDSL & Wireless, Inc
> IntAirNet- Fixed Wireless Broadband
>
>
> ----- Original Message -----
> From: "Lonnie Nunweiler" <[EMAIL PROTECTED]>
> To: "WISPA General List" <wireless@wispa.org>
> Sent: Tuesday, April 11, 2006 9:36 PM
> Subject: Re: [WISPA] Best system for a new WISP
>
>
> Using the 533 MHz IXP-420 we can get an Atheros to just over 35 mbps
> of non compressible data and almost 90 mbps of compressible data.
>
> Lonnie
>
> On 4/11/06, Travis Johnson <[EMAIL PROTECTED]> wrote:
> >  Dan,
> >
> >  We had this discussion a few weeks ago, although it may have been on
> > another wireless list.
> >
> >  What processor and setup are you using to get 30Mbps? The fastest I have
> > seen with routerboard 532's in a p2p config is 20Mbps of TCP traffic
> > passing
> > thru the RB's. Do you have outdoor enclosures?
> >
> >  Travis
> >  Microserv
> >
> >
> >  [EMAIL PROTECTED] wrote:
> >
> >
> >
> > I believe that the atheros chipset is capped at 35Mbps, although users of
> > MT
> > have claimed higher using very fast cpu's.
> >
> >
> >
> > I have several atheros/MT/nstream links (PTP and PTMP) that push 30Mbps….
> > Pretty impressive throughput, plus adjustable channels, plus QoS for VoIP
> > and all the other features available make a nice system
> >
> >
> >
> >
> >
> >
> > Dan Metcalf
> >  Wireless Broadband Systems
> >  www.wbisp.com
> >  781-566-2053 ext 6201
> >
> > 1-888-wbsystem (888) 927-9783
> >  [EMAIL PROTECTED]
> >  support: [EMAIL PROTECTED]
> >
> >
> >
> >
> >  ________________________________
> >
> >
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Travis
> > Johnson
> >  Sent: Tuesday, April 11, 2006 9:28 AM
> >  To: WISPA General List
> >  Subject: Re: [WISPA] Best system for a new WISP
> >
> >
> >
> > Hi,
> >
> >  Does anyone know actual TCP throughput with StarOS on their 533mhz boards
> > in just a point to point config, using 20mhz of spectrum?
> >
> >  Travis
> >  Microserv
> >
> >  Paul Hendry wrote: All the details are on the Valemount web site
> >
> >  http://www.staros.com/starvx/
> >
> >  Cheers,
> >
> >  P.
> >
> >  -----Original Message-----
> >  From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On
> >  Behalf Of Richard Goodin
> >  Sent: 11 April 2006 09:15
> >  To: wireless@wispa.org
> >  Subject: RE: [WISPA] Best system for a new WISP
> >
> >  So... Who makes them?, how much?
> >
> >
> >
> >
> >  Hi Richard,
> >
> >  This cloaking mechanism is the 5MHz and 10MHz channel sizes that
> >  George was referring to on the Star WAR boards. Works really well and
> > even
> >  seems to improve signal quality.
> >
> >  Cheers,
> >
> >  P.
> >
> >  -----Original Message-----
> >  From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On
> >  Behalf Of Richard Goodin
> >  Sent: 11 April 2006 08:09
> >  To: wireless@wispa.org
> >  Subject: Re: [WISPA] Best system for a new WISP
> >
> >
> >
> >
> >  Guys;
> >  These all sound great.  I was reading just a couple months back about a
> >  WISP
> >
> >  operator that had a severe problem.  Just a few yards away, maybe 300
> > feet,
> >  another guy put up his tower.  I think they were both on 2.4 GHZ, and
> >  someone suggested a different AP that would not even be detected by
> >  conventional systems.  Something about nonstandard bandwidth, channel
> >  spacing or coding.  I really feel that stealth is best here.  These other
> >  guys have been in business for a while and could cause trouble that I do
> >  not
> >
> >  need.
> >
> >  Lee
> >
> >
> >  Trango does make a good product. I still have 2 Sunstream AP's in use.
> >
> >  They
> >
> >
> >
> >  are like Timex watches.
> >
> >  I'm using Star War boards. A little bit more than the trango s. The 2
> >
> >  card
> >
> >
> >  boards in a 5 gig rootenna let me use the 2nd card for an omni.
> >  Speeds are about 20+ megs or so and I cloak down to 5MHz and 10MHz
> >
> >  channel
> >
> >
> >  sizes.
> >
> >  One of the things I've been doing is slapping up repeaters all over the
> >  place. Cheap as hell, about 400.00 or so.
> >
> >  Lately I've ran lmr400 into some of my customers attics and installed an
> >  omni for their home wifi. We tend to service our customers right to the
> >
> >  pc
> >
> >
> >  and it's a lot better router than a linksys. And I have happier customers
> >  and I'm happier.
> >
> >  The 2 port and the 4 port both have dual ethernet as well.
> >
> >  Pretty versatile product. Lonnie has come along way with the new war
> >  platform.
> >
> >
> >  George
> >
> >
> >
> >
> >
> >  Travis Johnson wrote:
> >
> >
> >  That's on quantity 30.... $149 each. 5.8ghz, dual polarity, up to 3
> >
> >  miles
> >
> >
> >
> >  (add $40 for a dish and it goes up to 13 miles) and delivers up to
> >
> >  10Mbps.
> >
> >
> >
> >
> >  Hard to beat! And with SmartPolling on the AP, you can get hundreds of
> >  customers per sector.
> >
> >  Travis
> >  Microserv
> >
> >  Rick Smith wrote:
> >
> >
> >
> >  that's only quantity (large!) pricing isn't it ?
> >
> >  Brian Rohrbacher wrote:
> >
> >
> >
> >  If it's pretty absent of trees you might look at 5.8.  Trango has that
> >  cpe for $150.  Not going to find any propriety gear cheaper.
> >
> >  Richard Goodin wrote:
> >
> >
> >
> >  I have been planning my WISP for about a year, and have yet to begin
> >  delivery of bandwidth to customers. My choice for service delivery
> >
> >  was
> >
> >
> >
> >
> >
> >
> >  802.11b, but with increased competition from other services nearby
> >  (about 5 miles away) I am wondering how to avoid problems.  I have a
> >  50' tower, and it is ROHN 45g.  My choice for antennas would be 4 90
> >  degree horizontal antennas.  I have looked at bandwidth and shopped
> >
> >  it
> >
> >
> >
> >
> >
> >
> >  to death.  My best price is $400 from Lime Light.  And I've built a
> >  couple of servers, acquired some switches and a router.  The Router
> >
> >  is
> >
> >
> >
> >
> >
> >
> >  a Cisco 1750.
> >
> >  My questions:
> >
> >  What CPE's and AP's would work best in this environment?  I want to
> >  keep interferance to a minimum, as well as control costs.  My
> >  environment includes lots of desert, and single story buildings.
> >
> >  Lee
> >
> >
> >
> >  --
> >  WISPA Wireless List: wireless@wispa.org
> >
> >  Subscribe/Unsubscribe:
> >  http://lists.wispa.org/mailman/listinfo/wireless
> >
> >  Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
> >  --
> >  WISPA Wireless List: wireless@wispa.org
> >
> >  Subscribe/Unsubscribe:
> >  http://lists.wispa.org/mailman/listinfo/wireless
> >
> >  Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >  --
> >  No virus found in this incoming message.
> >  Checked by AVG Free Edition.
> >  Version: 7.1.385 / Virus Database: 268.4.1/307 - Release Date: 10/04/2006
> >
> >
> >  --
> >  No virus found in this outgoing message.
> >  Checked by AVG Free Edition.
> >  Version: 7.1.385 / Virus Database: 268.4.1/307 - Release Date: 10/04/2006
> >
> >
> >  --
> >  WISPA Wireless List: wireless@wispa.org
> >
> >  Subscribe/Unsubscribe:
> >  http://lists.wispa.org/mailman/listinfo/wireless
> >
> >  Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
> >
> >
> >
> >
> >
> > --
> >  No virus found in this incoming message.
> >  Checked by AVG Free Edition.
> >  Version: 7.1.385 / Virus Database: 268.4.1/307 - Release Date: 04/10/2006
> >
> >
> >
> >
> >
> > --
> >  No virus found in this outgoing message.
> >  Checked by AVG Free Edition.
> >  Version: 7.1.385 / Virus Database: 268.4.1/307 - Release Date: 04/10/2006
> >
> > --
> > WISPA Wireless List: wireless@wispa.org
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
> >
>
>
> --
> Lonnie Nunweiler
> Valemount Networks Corporation
> http://www.star-os.com/
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


--
Lonnie Nunweiler
Valemount Networks Corporation
http://www.star-os.com/
--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to