Brian, Have you tried to turn the power down on the SR5's to see if that's the problem?
Mac Dearman -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: Tuesday, September 12, 2006 9:17 PM To: WISPA General List Subject: Re: [WISPA] MT power supplies I climbed and swapped RB532 and it is still messing up. Exact cable length is 265ft. Eth port to poe injector. How do I figure out if this is too far for 2 sr5? This is running nstream. Brian Brian Rohrbacher wrote: > So, does anyone know if it looks like I would be fine on the power > side of things? > I have tweaked the ethernet port settings for no gain. > > Next step is to get climbing 280ft to replace board, but I'd like to > confirm power first. > > Brian > > Brian Rohrbacher wrote: > >> I have a RB 532 on 300 foot of cat 5 with 2 sr5. >> I'm using poe 48v .700a power supply. >> I'm seeing weirdness. >> >> Do I have enough "juice" >> >> Brian > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/