just for curiosity: how many nodes?
> Hello, > > Yes our core is running MPLS. We us Mikrotik routers so it does not > coast use a huge amount. They also have anew virtual router that allows you > to take 1 box and put 2 or more routers on it. We have a MPLS core router > and a Edge router at each main tower on our ring. This did save use a about > 50% because we did not have to buy the second router. > > Thanks > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Paolo Di Francesco > Sent: Friday, January 23, 2009 10:12 AM > To: WISPA General List > Subject: Re: [WISPA] How many switches can do RSTP? > > Hi Nathan, > > it could be a solution, but: > > 1) the only product I found interesting it CISCO ME switch with MPLS. > Any other suggestion welcome. > 2) cost per site goes really high for the backbone. If we would like to > implement MPLS in each site, it would cost us a fortune. > 3) Still wondering about maturity or many MPLS implementations, not sure > the brands that really work and the ones which does not. > > Suggestions welcome ;) > > P.S. are you using MPLS? > >> Hello, >> >> MPLS >> >> -----Original Message----- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >> Behalf Of Paolo Di Francesco >> Sent: Friday, January 23, 2009 9:58 AM >> To: WISPA General List >> Subject: Re: [WISPA] How many switches can do RSTP? >> >> we are routed, but routed has other problems. So I was just wondering >> about switched... >> >> Thank you. >> >>> If you have that many a routed network would be much simpler. >>> >>> Any ideas on the limit of stp devices, though? >>> >>> On 1/23/09, Paolo Di Francesco <difrance...@teleinform.com> wrote: >>>> Dear All >>>> >>>> I am wondering how many switches can be put together in a bridged >>>> environment (via radio-bridges) with the Rapid STP. Just curious because >>>> I did not find anywhere the maximum number and wondering if the backbone >>>> collapse after 10 or 100 or 1000 switches. >>>> Also wondering what do you advice, I know that not all the switches are >>>> the same... (thinking about HP for this application) >>>> >>>> Thank you in advance. >>>> >>>> >>>> -- >>>> >>>> >>>> Ing. Paolo Di Francesco >>>> >>>> Teleinform S.p.A. >>>> Sede Legale: Via Francesco Paolo Di Blasi 1, 90144 Palermo >>>> Unita' Operativa: Via Regione Siciliana 49, 90046 Monreale >>>> Tel: +39-091-6408576, +39-091-6404501 >>>> Fax: +39-091-6406200 >>>> >>>> http://www.wikitel.it >>>> http://www.teleinform.com >>>> >>>> >>>> >>>> >>>> >>>> > ---------------------------------------------------------------------------- >> ---- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> > ---------------------------------------------------------------------------- >> ---- >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >> > > -- Ing. Paolo Di Francesco Teleinform S.p.A. Sede Legale: Via Francesco Paolo Di Blasi 1, 90144 Palermo Unita' Operativa: Via Regione Siciliana 49, 90046 Monreale Tel: +39-091-6408576, +39-091-6404501 Fax: +39-091-6406200 http://www.wikitel.it http://www.teleinform.com -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/