I have changed all su's from cir of 9999 and mir of 9999 to cir of 128 and mir of 9999.
I got rid of two su to su radios that were pr and got rid of the group they were on (one was a tower backhaul that's no longer there, the other is my office but we're using a new MT setup so I didn't need the su to su anyway). The first test to customer A's radio showed a loop back test of only 66% success in ap to su. The second test showed 93% (the changes above had already been made, go figure). After the power leveling I'm still at 93% success on the loop back test. Strange. Now suid1 is dropping back down to nothing useful. 66% success is all. The only change I made this time was the noise threshold. I moved it up and the % had dropped to 80% so I moved the noise back down to -90 and still dropped to the 66% level. Customer B's radio is suid 8. It's always running at 100%. There are 4 sus total. 1,2,6 and 8. 1 and 2 are the oldest and never run 100% clean. 6 and 8 are the newest ones and run at or very near 100%. I think I'll go upgrade the firmware (I HATE doing that with trango radios, what a goofy old fashioned pita it is) on customer A and see what the latest version does for us. laters, marlon ----- Original Message ----- From: "Josh Luthman" <[email protected]> To: "WISPA General List" <[email protected]> Sent: Friday, June 12, 2009 8:38 AM Subject: Re: [WISPA] Need some quick trango help > Oh sorry - I reread it and see there was a second customer/radio - not a > second radio in the same spot. Confused with these A and B variables I > am. > > Do you have forwarding groups on for these customers? If you don't need > them then definitely leave them all out of any SU to SU groups. > > Did you try the power leveling yet? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > "When you have eliminated the impossible, that which remains, however > improbable, must be the truth." > --- Sir Arthur Conan Doyle > > > On Fri, Jun 12, 2009 at 11:28 AM, Marlon K. Schafer > <[email protected]>wrote: > >> I thought about that too. But if that were the case turning off the >> other >> customer's radio should have no effect right? >> marlon >> >> ----- Original Message ----- >> From: "Josh Luthman" <[email protected]> >> To: "WISPA General List" <[email protected]> >> Sent: Friday, June 12, 2009 8:20 AM >> Subject: Re: [WISPA] Need some quick trango help >> >> >> > If they're fox units I've got $50 that says the ethernet port on it is >> > bad. >> > The last 10 times this happened to me it was always a junk ethernet >> > card. >> > >> > Josh Luthman >> > Office: 937-552-2340 >> > Direct: 937-552-2343 >> > 1100 Wayne St >> > Suite 1337 >> > Troy, OH 45373 >> > >> > "When you have eliminated the impossible, that which remains, however >> > improbable, must be the truth." >> > --- Sir Arthur Conan Doyle >> > >> > >> > On Fri, Jun 12, 2009 at 11:23 AM, Cameron Kilton <[email protected]> >> wrote: >> > >> >> Good call. >> >> >> >> -----Original Message----- >> >> From: [email protected] [mailto:[email protected]] >> >> On >> >> Behalf Of Kelly Shaw >> >> Sent: Friday, June 12, 2009 11:12 AM >> >> To: 'WISPA General List' >> >> Subject: Re: [WISPA] Need some quick trango help >> >> >> >> Hi, >> >> >> >> Just curious. Have you done the "SU POWERLEVELING" command on the >> >> AP? >> >> >> >> Kelly Shaw >> >> Kinex Telecom >> >> PO Box 976 >> >> Halifax, VA 24558 >> >> Desk: 434-476-8800 x2400 >> >> Toll Free: 1.888.392.4804 >> >> Mobile: 434-579-2113 >> >> http://www.kinex.net >> >> >> >> >> >> -----Original Message----- >> >> From: [email protected] [mailto:[email protected]] >> >> On >> >> Behalf Of Marlon K. Schafer >> >> Sent: Friday, June 12, 2009 11:02 AM >> >> To: WISPA General List >> >> Subject: [WISPA] Need some quick trango help >> >> >> >> Hi All, >> >> >> >> Got a strange one here. >> >> >> >> I have a 5830 AP with 4 customers on it. 3 have no complaints, 1 gets >> >> 300 >> >> to 400k downloads and 1000 to 3000 uploads. >> >> >> >> All links are less than one mile and are within 1/4 mile of each >> >> other. >> >> >> >> Two are right across the street from each other. >> >> >> >> Yesterday we had a few strange things happen so I went hunting for the >> >> cause. While looking I noticed customer B was my top bandwidth user >> >> and >> >> he >> >> stayed there for at least 30 minutes. >> >> >> >> As a part of trying to get customer A working better I thought I'd try >> >> turning off customer B (across the street and on the same AP as >> >> customer >> >> A). >> >> >> >> I shut down customer B (oh yeah, all CPE are Fox SE 5800) and ran a >> >> speed >> >> test at customer A. Now they got 6000 down and 5000 up. Turn >> >> customer >> >> B >> >> back on and customer A went back down to unusable service. >> >> >> >> Here's the strange part, I can run the same speed test at customer B >> >> and >> >> >> >> they get good speeds all of the time. 8000 to 9000 down, 7000 to 8000 >> >> up. >> >> Theoretical max on the Trango system. So I don't think that they are >> >> causing this problem due to steady usage. >> >> >> >> The only thing that's popping out in my mind is that customer B has a >> >> newer >> >> radio (it was replaced last year or so). Could this somehow be a >> >> firmware >> >> issue? >> >> >> >> Neither customer has a programmed preference over the other one at the >> >> AP >> >> level. The other two customers on the AP haven't called with >> >> problems. >> >> >> >> If anyone can call me with some advice this am I'd sure appreciate it. >> >> 509.988.0260 Customer A (the nearly dead one) has a big project due >> >> this >> >> afternoon and I'm at a loss so far. >> >> >> >> Thanks, >> >> marlon >> >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> >> ---- >> >> ---- >> >> WISPA Wants You! Join today! >> >> http://signup.wispa.org/ >> >> ------------------------------------------------------------------------ >> >> ---- >> >> ---- >> >> >> >> WISPA Wireless List: [email protected] >> >> >> >> Subscribe/Unsubscribe: >> >> http://lists.wispa.org/mailman/listinfo/wireless >> >> >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> >> -------- >> >> WISPA Wants You! Join today! >> >> http://signup.wispa.org/ >> >> ------------------------------------------------------------------------ >> >> -------- >> >> >> >> WISPA Wireless List: [email protected] >> >> >> >> Subscribe/Unsubscribe: >> >> http://lists.wispa.org/mailman/listinfo/wireless >> >> >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> >> >> >> >> >> -------------------------------------------------------------------------------- >> >> WISPA Wants You! Join today! >> >> http://signup.wispa.org/ >> >> >> >> >> -------------------------------------------------------------------------------- >> >> >> >> WISPA Wireless List: [email protected] >> >> >> >> Subscribe/Unsubscribe: >> >> http://lists.wispa.org/mailman/listinfo/wireless >> >> >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> > >> > >> > >> -------------------------------------------------------------------------------- >> > WISPA Wants You! Join today! >> > http://signup.wispa.org/ >> > >> -------------------------------------------------------------------------------- >> > >> > WISPA Wireless List: [email protected] >> > >> > Subscribe/Unsubscribe: >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> > Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
