I'm doing just that using Ubiquiti Pico2HP units as the AP and bullets for the backhaul (5GHz whenever possible). -RickG
On Thu, Sep 24, 2009 at 3:21 PM, Mark McElvy <mmce...@accubak.com> wrote: > I suppose that is a good term, I would like to be able to redistribute > service to small pockets of houses, 6-12, without putting up a full > blown AP/BH setup. Any one else doing this? I normally use 5.8 for BH > typically and 2.4 for clients, I was thinking of maybe using a PS2 to > receive/BH and connect it to an NS2 with small omni to redistribute. > Both would be in a bridge and allow the clients connected to connect to > the main AP for PPPoE authentication. Is this a reasonable or ridiculous > solution? Any other solutions others are using that might be better? I > know I could use MT but that would add complexity to the mix I don't > need. > > > > Mark > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
