No...it's not easier as I never want to turn that off. For example I almost
exclusively use JTAlert and single-clicking a CQ there starts a QSO just like
one would want. And JTALert also gets it right when clicking on a non-CQ where
all the messages get generated but Enable Tx is not turned on.
But double-click in WJST-X on a non-CQ that's not for you and off we transmit.
I don't do that nearly as often as the "normal" operating mode and I may be in
Hold Tx Freq or not...so having to check other boxes on/off is not conducive to
smooth operating.
Others have voiced similar things like clicking just to get the DX Call box to
populate (then JTAlert gets it and you can easily do a QRZ lookup).
You could make it so that if Rx/Tx offsets are different you allow Enable Tx it
but getting that nitnoid about different beahviors depending on what you're
doing is probably not good.
I don't see the problem with having to click Enable Tx whenever you are
tailending somebody....seeing as how that is specifically what you want to do
it's very intuitive that you have to smoosh another button....and if you don't
then you don't impact anybody but yourself.
de Mike W9MDB
On Monday, October 15, 2018, 5:01:52 PM CDT, Tom Melvin <[email protected]>
wrote:
Would it not just be easier to Un-Tick the ‘Double Click on call sets TX
Enable’ in Settings - you can click to your hearts content, do the DX lookup,
play with QRZ etc.
Make sure they have finished and when you are happy with split/freq etc. just
click Enable button
Lot less chance of making errors
TomGM8MJV
On 15 Oct 2018, at 19:55, Carey Fisher <[email protected]> wrote:
Yes, Gary's right. I would like a single click (or ???) to do the lookup so I
don't have to "quickly jab the Halt Tx button".
On Mon, Oct 15, 2018 at 2:39 PM Gary McDuffie <[email protected]> wrote:
> On Oct 15, 2018, at 11:22, Black Michael via wsjt-devel
> <[email protected]> wrote:
>
> Maybe we have a different opinion of the path-of-least-resistance here.
Personally, I often double click a line just to have the callsign looked up and
get the grid, whether I intend to work him or not. I just have to quickly jab
the halt tx button to be sure it doesn’t go out or at least is limited to a
second or so transmit, if that.
Gary - AG0N
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Carey [email protected]
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
