thanks Steve What about 6m. My antenna is pointing south. I note in the blurb sheet that there is a suggestion of 50.260 not 50.313.
Ken On Tue, 27 Nov 2018 at 11:03, Stephen Ireland <vk3...@hotmail.com> wrote: > Ken, > > > > I am working on driving it up a bit as you can gather without upsetting > those who have bugs to report... Yet as I state we are in “far away” lands > to many and therefore rely heavily on propagation and its vagrancies. > > > > I am running a second instance here of 1.9.2 in parallel – sniffing the > same Rx data; The machine used is an I7 (3770) with 16Gb RAM so it should > handle both. > > > > Some sigs are coming back on the same frequency and are not V1 and are not > decoding. > > Upgrading now to “Deep” decoding with RC5. > > > > 73 > > > > Steve I > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > > ------------------------------ > *From:* Ken Myers <kenmyersglo...@gmail.com> > *Sent:* Tuesday, November 27, 2018 11:49:46 AM > *To:* wsjt-devel@lists.sourceforge.net > *Subject:* Re: [wsjt-devel] 2RSC3 > 2RSC4 decoding disappeared FT8 > > You are the only 77bit. plenty of old format. > > On Tue, 27 Nov 2018 at 10:48, Ken Myers <kenmyersglo...@gmail.com> wrote: > >> Thanks Steve Sanity regained!!! >> >> On Tue, 27 Nov 2018 at 10:43, Stephen Ireland <vk3...@hotmail.com> wrote: >> >>> Ken (and others), >>> >>> >>> >>> I am actually sending now (27/11/18 UTC 00:30) main band 20m at 1550 Hz. >>> >>> Everyone so no screaming about operating above 2K in offset as I am >>> interested in the interaction between v1 and v2 sigs. >>> >>> >>> >>> I have been doing so for around 5 mins on a rather active band ... I >>> will do so for around another hour or so. >>> >>> >>> >>> 73 >>> >>> >>> >>> Steve I >>> >>> >>> >>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for >>> Windows 10 >>> >>> >>> ------------------------------ >>> *From:* Ken Myers <kenmyersglo...@gmail.com> >>> *Sent:* Tuesday, November 27, 2018 11:31:14 AM >>> *To:* wsjt-devel@lists.sourceforge.net >>> *Subject:* Re: [wsjt-devel] 2RSC3 > 2RSC4 decoding disappeared FT8 >>> >>> 1 decode on 20m - frq 383 ?? seems to work. Like fishing - have to wait >>> quietly or NOISILY sent out string of CQ - no fish. Checking 6m >>> >>> THanks >>> >>> >>> On Tue, 27 Nov 2018 at 09:53, Ken Myers <kenmyersglo...@gmail.com> >>> wrote: >>> >>>> Thanks - shall persist >>>> >>>> Cheers Ken >>>> VK4GC >>>> >>>> On Tue, 27 Nov 2018 at 09:42, Bill Somerville <g4...@classdesign.com> >>>> wrote: >>>> >>>>> Hi Ken, >>>>> >>>>> comments in line below. >>>>> >>>>> On 26/11/2018 23:15, Ken Myers wrote: >>>>> > 2 installations - >>>>> > 1 MSSurface Win10 up to date, 2 radios (FT991a & FTdx3000 both USB) >>>>> - >>>>> > non decode, >>>>> > 2 HP Allinone with FT897/Singnalink. - non decode, >>>>> > (both setups using HRD (up to date) for CAT control) >>>>> This combination of rig and interface requires a specific setup. The >>>>> FT-817/857/897(D) series of rigs do not accept CAT commands while >>>>> transmitting. You must *not* check the settings option >>>>> "Settings->General->Allow Tx frequency changes while transmitting" and >>>>> you must set the SignaLink delay knob to minimum. You should set the >>>>> WSJT-X PTT configuration "Settings->Radio->PTT Method" to "VOX" >>>>> although >>>>> some have found it necessary to use the CAT PTT Method to avoid any >>>>> CAT >>>>> commands while the rig is in Tx mode. >>>>> > >>>>> > For all: >>>>> > 1.9.1 works great >>>>> > 2.0 RC3 works great >>>>> > 2.0 RC4 good waterfall (therefore good audio present) - NO decode. >>>>> > >>>>> > uninstalling/reinstalling forward and back through versions gives >>>>> the >>>>> > same result. >>>>> > >>>>> > i have concluded: >>>>> > 1 I must be holding my mouth wrong - OR >>>>> > 2 I have missed a new setting. >>>>> > 3 When I have been looking/testing RC4, no RC4 (77 bit) >>>>> > transmissions. Not sure here as I have been especially been looking >>>>> > top band. >>>>> > >>>>> > 2 probably!! >>>>> > >>>>> Almost certainly 3, there has been a relatively low usage to 77-bit >>>>> FT8 >>>>> on the normal HF FT8 sub-bands. It seems that most users of RC4 have >>>>> reverted to v1.9.1 so the volume of 77-bit traffic is low except for a >>>>> couple of days after a beta release. It would be good if users of RC5 >>>>> could stick with it and try to drive up the level of activity so that >>>>> issues can be discovered before the final GA release. >>>>> >>>>> 73 >>>>> Bill >>>>> G4WJS. >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> wsjt-devel mailing list >>>>> wsjt-devel@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>>>> >>>> >>>> >>>> -- >>>> Cheers >>>> >>>> Ken Myers >>>> >>>> Sunnybank Hills QLD AUS >>>> M +61 414 487 004 >>>> >>>> >>> >>> -- >>> Cheers >>> >>> Ken Myers >>> >>> Sunnybank Hills QLD AUS >>> M +61 414 487 004 >>> >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >> >> >> -- >> Cheers >> >> Ken Myers >> >> Sunnybank Hills QLD AUS >> M +61 414 487 004 >> >> > > -- > Cheers > > Ken Myers > > Sunnybank Hills QLD AUS > M +61 414 487 004 > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- Cheers Ken Myers Sunnybank Hills QLD AUS M +61 414 487 004
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
