The dude said "manual is wrong".
Trying to get more information on serial cable to see if that's the cause.
Old thread noticed a difference between cable types on a 450. Might have to do
with RTS/CTS wiring differences and whether the cable supports hardware flow
control.
https://wsprnet.org/drupal/node/1307
Mike W9MDB
On Monday, February 8, 2021, 12:06:48 PM CST, Bill Somerville
<[email protected]> wrote:
On 08/02/2021 17:45, Black Michael via wsjt-devel wrote:
> Anybody with a TS-450S out there that is available for some testing?
>
> I've got somebody claiming it needs 1 stop bit and XONXOFF handshake
> which I've never heard before and 2 stop bits and HARDWARE handshake
> is the default setup and has been for years.
>
> Mike W9MDB
Mike,
according to the TS-450S/TS-690S CAT programming manual it is full
duplex 4800 baud 8N2 with RTS/CTS flow control using TTL signal levels.
I would be very surprised if that information was incorrect!
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
