A din 6 pin and this will work fine. https://www.adafruit.com/product/954
No magic. Just a bit of soldering. Aug AG5AT Sent from my iPad > On Feb 8, 2021, at 1:02 PM, Bill Somerville <[email protected]> wrote: > > > Hi Mike, > > there are several third-party replacements for the now unavailable IF-232C > module that is needed on this and other early Kenwood rigs. Most faithfully > replicate the original IF-232C, some may not. The manual is almost certainly > correct, the reporter, if he is correct, almost certainly has a non-standard > IF-232C replacement. > > 73 > Bill > G4WJS. > > On 08/02/2021 18:17, Black Michael via wsjt-devel wrote: >> The dude said "manual is wrong". >> >> Trying to get more information on serial cable to see if that's the cause. >> >> Old thread noticed a difference between cable types on a 450. Might have to >> do with RTS/CTS wiring differences and whether the cable supports hardware >> flow control. >> >> https://wsprnet.org/drupal/node/1307 >> >> Mike W9MDB >> >> >> On Monday, February 8, 2021, 12:06:48 PM CST, Bill Somerville >> <[email protected]> wrote: >> >> >> On 08/02/2021 17:45, Black Michael via wsjt-devel wrote: >> >> > Anybody with a TS-450S out there that is available for some testing? >> > >> > I've got somebody claiming it needs 1 stop bit and XONXOFF handshake >> > which I've never heard before and 2 stop bits and HARDWARE handshake >> > is the default setup and has been for years. >> > >> > Mike W9MDB >> >> Mike, >> >> >> according to the TS-450S/TS-690S CAT programming manual it is full >> duplex 4800 baud 8N2 with RTS/CTS flow control using TTL signal levels. >> I would be very surprised if that information was incorrect! >> >> 73 >> Bill >> G4WJS. > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
