Hmmm..that's 4-wire...so ground, tx, rx, and 5V and wouldn't work with hardware
flow control.
Mike W9MDB
On Monday, February 8, 2021, 01:33:11 PM CST, August Treubig
<[email protected]> wrote:
A din 6 pin and this will work fine.
https://www.adafruit.com/product/954
No magic. Just a bit of soldering.AugAG5AT
Sent from my iPad
On Feb 8, 2021, at 1:02 PM, Bill Somerville <[email protected]> wrote:
Hi Mike,
there are several third-party replacements for the now unavailable IF-232C
module that is needed on this and other early Kenwood rigs. Most faithfully
replicate the original IF-232C, some may not. The manual is almost certainly
correct, the reporter, if he is correct, almost certainly has a non-standard
IF-232C replacement.
73
Bill
G4WJS.
On 08/02/2021 18:17, Black Michael via wsjt-devel wrote:
The dude said "manual is wrong".
Trying to get more information on serial cable to see if that's the cause.
Old thread noticed a difference between cable types on a 450. Might have to
do with RTS/CTS wiring differences and whether the cable supports hardware flow
control.
https://wsprnet.org/drupal/node/1307
Mike W9MDB
On Monday, February 8, 2021, 12:06:48 PM CST, Bill Somerville
<[email protected]> wrote:
On 08/02/2021 17:45, Black Michael via wsjt-devel wrote:
> Anybody with a TS-450S out there that is available for some testing?
>
> I've got somebody claiming it needs 1 stop bit and XONXOFF handshake
> which I've never heard before and 2 stop bits and HARDWARE handshake
> is the default setup and has been for years.
>
> Mike W9MDB
Mike,
according to the TS-450S/TS-690S CAT programming manual it is full
duplex 4800 baud 8N2 with RTS/CTS flow control using TTL signal levels.
I would be very surprised if that information was incorrect!
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
