Hello Joe! Can you answer: have any benefits (in dynamic range of decoding FT8) using more then 16 bit audio stream format under Windows 10? -- Sent from Mail.ru app for Android Monday, 01 May 2023, 05:18PM +03:00 from Joe Taylor via wsjt-devel wsjt-devel@lists.sourceforge.net :
>Hi Gary, > >On 4/26/2023 7:59 AM, K9RX wrote: > I had sent this on the 16^th of April but did not get a response… I > believe these are germane questions – and as far as I’ve been able to > tell they are not addressed in the manual. These pertain to the use of > “average” when running Q65. I’ve asked these questions in the EME group > – no one knew the answers but were also interested. > > 1. /Does average apply to each of multiple signals in the window?/ >Yes > > 2. /Is there a separate average queue for 1^st and 2^nd sequence? > (would be great if RXing both looking for stns)/ >Yes > > 3. /IF each signal has its own average: and if Auto Clear is on does it > only clear the averages for those that have now decoded or / > 4. /if only one station decodes and there are say 3 stations there (in > the averages) do all the averages now get cleared out?/ > >"Auto Clear Avg after decode" clears the averaging accumulator for the >relevant Odd or Even sequence when decoding at the selected offset >frequency is successful. The accumulator for the other sequence remains >intact. > >The small window near center of the status bar (see attached screen >shot) shows the number of Rx intervals available in the accumulator for >each sequence. > > I assumed 4. Which is why I turned off auto clear since if it is 4 above > it would never do an average if Lance, in the even cycle, always > decoded. And as mentioned I went from 0 averages in the AVG DEC window > with it on to several ongoing with it off. > >-- 73, Joe, K1JT >_______________________________________________ >wsjt-devel mailing list >wsjt-devel@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
