Hi Mike and all,
As a retired software developer may I make a different suggestion. I would ask
Uwe to update the interface so that at the beginning of the TX cycle the focus
should switch to the "Enable TX" this would remove the possibility of
inadvertent use of the mouse wheel or button that might create a problem for
the rig or amplifier.
73,.
Sam W2JDB
On Saturday, June 1, 2024 at 11:25:11 PM EDT, Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
No -- it's only on band change -- not just a frequency change within band.
So jumping around on the waterfall in WSJT-X or Doppler tracking in gpredict
still works...
Mike W9MDB
On Saturday, June 1, 2024 at 05:01:38 PM CDT, Laurie, VK3AMA via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
On 02/06/2024 6:49 am, Black Michael via wsjt-devel wrote:
> I just put a patch in Hamlib to ensure PTT gets turned off if it's on during
>a band change.
>
>
Will this change make the existing (and long standing) "Allow Tx frequency
changes while transmitting" option obsolete?
de Laurie VK3AMA
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
