We have new x3550M5 that we just discovered. After being discovered I ran
runcmd=bmcsetup command. I can ssh to the node and ipmitool lan print 1
tells me the following:
[xCAT Genesis running on qhimem0004 /]# ipmitool lan print 1
Set in Progress : Set Complete
Auth Type Support : NONE MD5 PASSWORD
Auth Type Enable : Callback :
: User : MD5 PASSWORD
: Operator : MD5 PASSWORD
: Admin : MD5
: OEM :
IP Address Source : Static Address
IP Address : 172.29.10.14
Subnet Mask : 255.255.0.0
MAC Address : 40:f2:e9:bb:86:dd
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 0.0.0.0
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
Cipher Suite Priv Max : Xaaaaaaaaaaaaaa
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
The IP is correct, and for set it indicates complete. However, I can not
telnet to this IP (qhimem0004-bmc).
Here is the hosts table entry for this node:
"qhimem0004-bmc","172.29.10.14",,,"qhimem0014 node bmc interface",
Here is the /etc/hosts file entry:
172.29.10.14 qhimem0004-bmc.quest.it.northwestern.edu qhimem0004-bmc
here is the nodels entry for the ipmi port:
[root@mgt log]# nodels qhimem0004 ipmi.bmcport
qhimem0004: 0
When trying to telnet to this address I get no route to host. I have logged
in to the switch itself and see mac address of the interface show up on the
port on the switch, but not the mac of the BMC port.
Any help is greatly appreciated.
Thanks,
Damir
------------------------------------------------------------------------------
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
