Yes trying to use shared on board gigabit port: [xCAT Genesis running on qhimem0004 /bin]# ipmitool raw 0xc 2 1 0xc0 0 0
11 01 On Tue, Oct 6, 2015 at 12:36 PM Jarrod Johnson <[email protected]> wrote: > Can you do an ipmitool raw 0xc 2 1 0xc0 0 0 > > > > I assume you are trying to use shared on the on board gigabit port? If > another configuration , let me know. > > > > *From:* Damir Krstic [mailto:[email protected]] > *Sent:* Tuesday, October 06, 2015 10:56 AM > *To:* xCAT Users Mailing list > *Subject:* [xcat-user] issue programing bmc > > > > We have new x3550M5 that we just discovered. After being discovered I ran > runcmd=bmcsetup command. I can ssh to the node and ipmitool lan print 1 > tells me the following: > > [xCAT Genesis running on qhimem0004 /]# ipmitool lan print 1 > > Set in Progress : Set Complete > > Auth Type Support : NONE MD5 PASSWORD > > Auth Type Enable : Callback : > > : User : MD5 PASSWORD > > : Operator : MD5 PASSWORD > > : Admin : MD5 > > : OEM : > > IP Address Source : Static Address > > IP Address : 172.29.10.14 > > Subnet Mask : 255.255.0.0 > > MAC Address : 40:f2:e9:bb:86:dd > > SNMP Community String : public > > IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 > > BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled > > Gratituous ARP Intrvl : 2.0 seconds > > Default Gateway IP : 0.0.0.0 > > Default Gateway MAC : 00:00:00:00:00:00 > > Backup Gateway IP : 0.0.0.0 > > Backup Gateway MAC : 00:00:00:00:00:00 > > 802.1q VLAN ID : Disabled > > 802.1q VLAN Priority : 0 > > RMCP+ Cipher Suites : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 > > Cipher Suite Priv Max : Xaaaaaaaaaaaaaa > > : X=Cipher Suite Unused > > : c=CALLBACK > > : u=USER > > : o=OPERATOR > > : a=ADMIN > > : O=OEM > > > > The IP is correct, and for set it indicates complete. However, I can not > telnet to this IP (qhimem0004-bmc). > > Here is the hosts table entry for this node: > > "qhimem0004-bmc","172.29.10.14",,,"qhimem0014 node bmc interface", > > Here is the /etc/hosts file entry: > > 172.29.10.14 qhimem0004-bmc.quest.it.northwestern.edu qhimem0004-bmc > > here is the nodels entry for the ipmi port: > > [root@mgt log]# nodels qhimem0004 ipmi.bmcport > > qhimem0004: 0 > > When trying to telnet to this address I get no route to host. I have > logged in to the switch itself and see mac address of the interface show up > on the port on the switch, but not the mac of the BMC port. > > > > Any help is greatly appreciated. > > Thanks, > > Damir > > ------------------------------------------------------------------------------ > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user >
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
