That still says dedicated, how weird, ipmi.bmcport should have changed that…
ipmitool raw 0xc 1 1 0xc0 0 Then after a minute, see what the lan print 1 looks like (it might need to rerun bmcsetup) Very confused why bmcsetup didn't enact that one… From: Damir Krstic [mailto:[email protected]] Sent: Tuesday, October 06, 2015 1:44 PM To: xCAT Users Mailing list Subject: Re: [xcat-user] issue programing bmc Yes trying to use shared on board gigabit port: [xCAT Genesis running on qhimem0004 /bin]# ipmitool raw 0xc 2 1 0xc0 0 0 11 01 On Tue, Oct 6, 2015 at 12:36 PM Jarrod Johnson <[email protected]<mailto:[email protected]>> wrote: Can you do an ipmitool raw 0xc 2 1 0xc0 0 0 I assume you are trying to use shared on the on board gigabit port? If another configuration , let me know. From: Damir Krstic [mailto:[email protected]<mailto:[email protected]>] Sent: Tuesday, October 06, 2015 10:56 AM To: xCAT Users Mailing list Subject: [xcat-user] issue programing bmc We have new x3550M5 that we just discovered. After being discovered I ran runcmd=bmcsetup command. I can ssh to the node and ipmitool lan print 1 tells me the following: [xCAT Genesis running on qhimem0004 /]# ipmitool lan print 1 Set in Progress : Set Complete Auth Type Support : NONE MD5 PASSWORD Auth Type Enable : Callback : : User : MD5 PASSWORD : Operator : MD5 PASSWORD : Admin : MD5 : OEM : IP Address Source : Static Address IP Address : 172.29.10.14 Subnet Mask : 255.255.0.0 MAC Address : 40:f2:e9:bb:86:dd SNMP Community String : public IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled Gratituous ARP Intrvl : 2.0 seconds Default Gateway IP : 0.0.0.0 Default Gateway MAC : 00:00:00:00:00:00 Backup Gateway IP : 0.0.0.0 Backup Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 Cipher Suite Priv Max : Xaaaaaaaaaaaaaa : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM The IP is correct, and for set it indicates complete. However, I can not telnet to this IP (qhimem0004-bmc). Here is the hosts table entry for this node: "qhimem0004-bmc","172.29.10.14",,,"qhimem0014 node bmc interface", Here is the /etc/hosts file entry: 172.29.10.14 qhimem0004-bmc.quest.it.northwestern.edu<http://qhimem0004-bmc.quest.it.northwestern.edu> qhimem0004-bmc here is the nodels entry for the ipmi port: [root@mgt log]# nodels qhimem0004 ipmi.bmcport qhimem0004: 0 When trying to telnet to this address I get no route to host. I have logged in to the switch itself and see mac address of the interface show up on the port on the switch, but not the mac of the BMC port. Any help is greatly appreciated. Thanks, Damir ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
