Hmm, the default(?) is 1500 - MTU=500 is way too low for normal usage.
since zd1211rw is also a mac80211 driver, can you give the pid modprobe.conf a
try to see if it helps? See http://bugzilla.kernel.org/show_bug.cgi?id=14168
--- On Sat, 13/2/10, Ernst J. Oud <ernst...@euronet.nl> wrote:
> L.S.
>
> I am running Slackware 13.0 (kernel 2.6.32) on an RDC
> (=i486 compatible)
> small embedded system and using a ZD1211b usb stick for
> wlan (client) access
> using the standard zd1211rw (module). Firmware version is
> 1.4
>
> This works fine as long as I specify an MTU
> smaller than 500 for
> wlan0.
>
> With a larger MTU the connection aborts when sending
> larger amounts of
> information, for instance in a telnet session doing an ls
> of a large directory.
> I can log in and I can do an ls on a small
> directory...
>
> This is not an USB WLAN stick problem; I tried three
> separate sticks from
> different vendors and they all exhibit this problem.
>
> With an MTU of say 448, wlan speed is half of what it
> could be so any help
> would be appreciated.
>
> TIA
>
> Ernst
------------------------------------------------------------------------------
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
http://p.sf.net/sfu/solaris-dev2dev
_______________________________________________
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
