Did some further experimenting. I remembered having an Thomson st121g USB 
WLAN stick and tried that (Prism chipset). With the same distro and config 
it works fine using minstrel or pid; i.e. with an MTU of 1500 no problems 
whatsoever. If I bring the box down and use my zd1211 stick instead (some 
distro/config) and boot it, it doesn't work with any MTU > 500 using pid or 

So this must be some zd1211rw driver issue. It isn't the slackware setup and 
not the hardware; i.e. not the embedded box since the st121g works fine on 
it and not the zd1211 stick since I used three separate sticks (from three 
different manufacturers: icidu, msi and cc&c) and they all have the same 

Any further clues?

BTW; the svn for the zd1211rw driver shows that the latest version is 3 
years old?



----- Original Message ----- 
From: "Hin-Tak Leung" <hintak_le...@yahoo.co.uk>
To: <zd1211-devs@lists.sourceforge.net>; "Ernst J. Oud" 
Sent: Saturday, February 13, 2010 11:51 PM
Subject: Re: [zd1211-devs] Problem with MTU > 500

Hmm, unfortunately yes - you can build both in to have it runtime 
switch-able, but you have to have both in before that can happen.(mintrel is 
the default).

--- On Sat, 13/2/10, Ernst J. Oud <ernst...@euronet.nl> wrote:

> Yes, it is a module and yes I did a
> reboot. I can remember having specified
> minstrel when compiling the kernel instead of pid so
> perhaps I need to
> reconfigure/recompile the kernel?

SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Reply via email to