Do you know if you are using xvmc to decode the HD?
----- Original Message ---- From: mrtisoy <daveh...@gmail.com> To: atv-bootloader <atv-bootloader@googlegroups.com> Sent: Tue, May 4, 2010 9:23:21 PM Subject: [atv-bootloader] Re: Ubuntu 10.04 "Lucid Lynx" I need to correct my earlier post. I was testing an SD program that was recorded on an HD channel. When testing true SD, mythfrontend is only taking ~30% of the CPU. When decoding HD the CPU is pinned. I'd love any advice that I can get. On May 4, 10:03 pm, mrtisoy <daveh...@gmail.com> wrote: > I was running Mythbuntu 8.04 on my appleTV for a couple years and had > to upgrade when I upgraded my server to 10.04. I just assumed that > installing a fresh copy of Mythbuntu 10.04 would be the smart thing to > do. Maybe I should have researched a little more. > > The install went fairly smoothly, it is up and running and > communicating with the server. Both HD and SD content plays well > except a blip every 5 seconds or so. I figured it had to do with the > gpu clocking. I can't seem to set the speed through the command line > or in a script, but it does work using the nvidia-settings GUI, but > even then the blips continue. > > I have seen a lot of swapping, but I was hoping that was because I was > running other programs as well (terminal, nvidia-settings) and > normally I would only be running the front end. > > Does anyone have suggestions on how to "slim" it down? Or should I > just jump to 9.04 or 9.10? > > Thanks! > > -- > To post to this group, send email to atv-bootloader@googlegroups.com > For more options, visit this group > athttp://groups.google.com/group/atv-bootloader?hl=en -- To post to this group, send email to atv-bootloader@googlegroups.com For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en -- To post to this group, send email to atv-bootloader@googlegroups.com For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en