Umm Rod Old Mate was referring to the my linked images for the RPi4, not your ones, the ones I built for other reasons.
On Sat, Dec 30, 2023 at 1:26 PM Rod Webster <r...@vehiclemods.net.au> wrote: > >None of those images were for the Rpi-5, I thought the RPi4 in the file > > Well yes they are. Andy and Steffan are using pi5 variant of my image which > is used for the 2.9.1 release from here: > > https://drive.google.com/file/d/1H_q0Ra-27ZDOhquvq179beUZQNVlex1f/view?usp=sharing > Filename (with rpi-5 in it): > rpi-5-debian-bookworm-6.1.61-rt15-arm64-ext4-2023-11-17-1520.img.xz > It was built for the Pi 5's BCM2712 board. > Username: cnc Password: cnc > to finalise the installation (wifi, password , locale etc) type: sudo > menu-config > > If the screen resolution is not right, it should be able to be fixed with > a parameter in one of the pi's config files. > > I have just completed and tested a 2.9.2 installer for X86 on Debian 12.4. > I managed to bypass the raspberry-firmware installation bug in earlier > versions (Inherited from Debian) > > https://drive.google.com/file/d/1nw0dGt5aZXVo8k68lLf4N_nzc0wTczAg/view?usp=sharing > I will also rebuild the images for the Pi4 and Pi5, but I am kernelled out > for today! > > Rod Webster > *1300 896 832* > +61 435 765 611 > Vehicle Modifications Network > www.vehiclemods.net.au > > > On Sat, 30 Dec 2023 at 12:00, Rob M <ozzyro...@gmail.com> wrote: > > > None of those images were for the Rpi-5, I thought the RPi4 in the file > > name would made the obvious, but as this a topic about the 4 I guess > there > > could be some confusion. > > > > As for the recent RPi5 image you tried does that have any issues with > > screen resolution? Is it stuck on a single resolution? Does it detect the > > display it's attached to ? These issues, as mentioned previously, a game > > stopper for myself. If they aren't an issue could you say what > > kind-brand-model display you're using ? > > > > > > > > > > > > On Sat, 30 Dec 2023, 11:40 andy pugh, <bodge...@gmail.com> wrote: > > > > > On Sat, 30 Dec 2023 at 00:27, Steffen Möller via Emc-developers > > > <emc-developers@lists.sourceforge.net> wrote: > > > > > > > Andy's image was a success - I just did not know the passwords. > > > > > > I mentioned it in a previous message, but it is cnc / cnc > > > > > > -- > > > atp > > > "A motorcycle is a bicycle with a pandemonium attachment and is > > > designed for the especial use of mechanical geniuses, daredevils and > > > lunatics." > > > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > > > > _______________________________________________ > > > Emc-developers mailing list > > > Emc-developers@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > > > > _______________________________________________ > > Emc-developers mailing list > > Emc-developers@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
