Re: [Emc-users] Probing

[Andy Pugh]

> On 28 Mar 2022, at 00:26, Thaddeus Waldner <thadw...@gmail.com> wrote:
> 
> I was able to get this working. Thanks for the help. I ended up using a macro 
> and modifying G54 Z offset

If you use G10 then it will use the current coordinate system. 

G10 is almost always the correct in to use for this. 

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users