On Feb 11, 2012 12:42 AM, "Michael Mol" <mike...@gmail.com> wrote:
>
> On Fri, Feb 10, 2012 at 12:29 PM, Pandu Poluan <pa...@poluan.info> wrote:
> >
> > On Feb 11, 2012 12:16 AM, "Michael Orlitzky" <mich...@orlitzky.com>
wrote:
> >>
> >> On 02/10/12 11:46, Pandu Poluan wrote:
> >> >
> >> > On Feb 10, 2012 10:08 PM, "Mick" <michaelkintz...@gmail.com
> >> > <mailto:michaelkintz...@gmail.com>> wrote:
> >> >>
> >> >> > >
> >> >> > > The need: a VPN client that:
> >> >> > > + can selectively send packets fulfilling a criteria (in this
> >> > case, dest=
> >> >> > > IP address of internal server)*
> >> >>
> >> >> As far as I know typical VPNs require the IP address (or FQDN) of
the
> >> >> VPN
> >> >> gateway.  If yours changes because ISP A goes down then the tunnel
> >> > will fail
> >> >> and be torn down.
> >>
> >> I must have missed the original message. OpenVPN can do this. Just
> >> specify multiple "remote vpn.example.com" lines in your client configs,
> >> one for each VPN server.
> >>
> >> It also handles updating the routing table for you. Rather than match
> >> "IP address of internal server," it will match "IP address on internal
> >> network" and route through the VPN automatically.
> >>
> >
> > I'm still torn between OpenVPN and HAproxy. The former works with both
TCP
> > and UDP, while the latter is lighter and simpler but works with TCP
only*.
> >
> > *The traffic will be pure TCP, but who knows I might need a UDP tunnel
in
> > the future.
> >
> > Any experience with either?
> >
> > Do note that I don't actually need a strong security (e.g. IPsec); I
just
> > need automatic failover *and* fallback.
>
> We're not using multiple internet connections to the same network
> where I work, but we do use UDP-based OpenVPN to connect a few
> networks.
>
> TCP OpenVPN connections are very, very bad, IMO. With a TCP VPN, you
> easily break systems' TCP stacks' link bandwidth estimation. I once
> had a 30s ping time, because the pipe was hogged and backlogged from a
> mail client synchronizing.
>

No, no, no. What I meant was running TCP and UDP *on top of* OpenVPN (which
uses UDP).

HAproxy seems to be able to perform its magic with TCP connections.

Rgds,

Reply via email to