i finally got to the point that I was happy with my setup and ready to hook it 
up to the livingroom tv (the wife even asked for it).  I hooked everything up 
and the 350 TV out stoped working.  
I think the problem lies in S-Video out.  I was thinking ahead and I plugged in 
the S-Video from the cable box to the 350.  The mistake I made was that I 
plugged the output from the cable box into the OUTPUT of the 350!  Odviously 
this was a mistake shich I changed (plugged it ointo the input instead.
But the Composite hasn't worked since.  I even pulled in the tv and monitor I 
was using to test woth, but no go.  I went back through Jarod's information 
again, but although each command reports success nothing is happening.

I think I changed something, but don'e knmow what.  My only thought is that I 
made the card think the S-Video was the new output, and it won't switch back.  
The command below shows this:

ioctl: VIDIOC_ENUMOUTPUT
        Output  : 0
        Name    : S-Video + Composite
        Type    : 0x00000002
        Audioset: 0x00000001
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )

It makes me think the output has changed from Composite to S-Video.

Here is the command:

[EMAIL PROTECTED] mythtv]# /usr/bin/ivtvctl -a
ioctl: IVTV_IOC_G_CODEC
Codec parameters
aspect      : 2
audio       : 0x00e9
bframes     : 3
bitrate_mode: 0
bitrate     : 8000000
bitrate_peak: 9600000
dnr_mode    : 0
dnr_spatial : 0
dnr_temporal: 0
dnr_type    : 0
framerate   : 0
framespergop: 15
gop_closure : 1
pulldown    : 0
stream_type : 0
ioctl: VIDIOC_G_FMT
        Type   : Video Capture
        Width  : 720
        Height : 480
ioctl: VIDIOC_QUERYCAP
        Driver name   : ivtv
        Card type     : Vanilla iTVC15 card
        Bus info      : 0
        Driver version: 512
        Capabilities  : 0x01070033
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Composite 0
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 1
        Name    : Composite 1
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : Composite 2
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 3
        Name    : Composite 3
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 4
        Name    : Tuner 0
        Type    : 0x00000001
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x0000000000003000 ( NTSC )
        Status  : 0

        Input   : 5
        Name    : Composite 4
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 6
        Name    : S-Video 0
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 7
        Name    : S-Video 1
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 8
        Name    : S-Video 2
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 9
        Name    : S-Video 3
        Type    : 0x00000002
        Audioset: 0x00000003
        Tuner   : 0x00000000
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
        Status  : 0
ioctl: VIDIOC_G_INPUT
Input = 4
ioctl: VIDIOC_ENUMOUTPUT
        Output  : 0
        Name    : S-Video + Composite
        Type    : 0x00000002
        Audioset: 0x00000001
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )

        Output  : 1
        Name    : Composite
        Type    : 0x00000002
        Audioset: 0x00000001
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )

        Output  : 2
        Name    : S-Video
        Type    : 0x00000002
        Audioset: 0x00000001
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )

        Output  : 3
        Name    : RGB
        Type    : 0x00000002
        Audioset: 0x00000001
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )

        Output  : 4
        Name    : YUV C
        Type    : 0x00000002
        Audioset: 0x00000001
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )

        Output  : 5
        Name    : YUV V
        Type    : 0x00000002
        Audioset: 0x00000001
        Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
ioctl: VIDIOC_G_OUTPUT
Output = 0
ioctl: VIDIOC_ENUMAUDIO
        Input   : 0
        Name    : Tuner Audio In

        Input   : 1
        Name    : Audio Line In
ioctl: VIDIOC_G_AUDIO
Input = 0: Tuner Audio In
ioctl: VIDIOC_G_FREQUENCY
Frequency = 10676
ioctl: VIDIOC_ENUMSTD
        index       : 0
        ID          : 0x0000000000003000
        Name        : NTSC
        Frame period: 1001/30000
        Frame lines : 525

        index       : 1
        ID          : 0x00000000000000FF
        Name        : PAL
        Frame period: 1/25
        Frame lines : 625

        index       : 2
        ID          : 0x00000000007F0000
        Name        : SECAM
        Frame period: 1/25
        Frame lines : 625
ioctl: VIDIOC_G_STD
Standard = 0x00003000
ioctl: VIDIOC_QUERYCTRL
Brightness = 127
Contrast = 63
Saturation = 63
Hue = 0
Volume = 58880
Mute = 0


Here is my message output:

[EMAIL PROTECTED] log]# /bin/dmesg | grep ivtv
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc2z) loading
ivtv: Linux version: 2.6.8-1.521 686 REGPARM 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: XXX PCI device: 0x7190 vendor: 0x8086
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a93493, 
Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: i2c attach [client=saa7115[0],ok]
ivtv: i2c attach [client=saa7127[0],ok]
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware is buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1 using 8 131072 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 16 131072 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: ivtv_enc_thread: pid = 2058, itv = 0x12c6eaa0
ivtv: Setting Tuner 2
ivtv: ivtv_dec_thread: pid = 2059, itv = 0x12c6eaa0
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c 
driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================  END INIT IVTV  ====================
ivtv: i2c attach [client=Hauppauge IR,ok]
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 
bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xe5510000, mapped to 0x13a23000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
ivtv-osd: fb0: iTVC15 TV out frame buffer device


Any thoughts?
I'm at a loss.  If the card hasn't switched to S-Voideo out then all I can 
think of is that I fried some part of the card which isn't reporting back an 
error.

Thanks for your help.

Nathan.



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to