0.3.3e works for me.... (PVR150MCE PAL) No issues...
0.3.3a was the first version with working audio since 0.3.2q...
Jaap.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.3 (e) loading
ivtv: Linux version: 2.6.11-1.14_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: XXX PCI device: 0x5833 vendor: 0x1002
tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 7665825
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
Chris Kennedy wrote:
I became aware of a problem in the cx25840 digitizer which we had
hit since changing the code from Ulfs original setup, where we would
reset the registers upon starting a capture. It seems if we don't
do this just right, then the chip doesn't setup itself to a good state for things like the proc-amp and possibly other settings. I had
to figure out the best way to keep from losing other settings we manually
set but still give it this reset. So this attempts that, seems like it
should work, please test this if you've had problems with pvr150/500 cards
since the version 0.3.2u or so, and also if you are currently doing fine
with these cards, so we can make sure this is a good overall global solution
for everyone (and really the right thing to do). Video proc-amp settings
would be dark and red without these changes, and this could also be why
some don't have sound anymore and various other things (like no capture).
#0.3.3e: http://www.ivtv.tv/releases/ivtv-0.3/
Thanks,
Chris
------------------------------------------------------- This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728 _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
