Perhaps I might ask a more preliminary question: when using project structure,
is cross-document referencing possible between two product files, or only
between two component files within a single product file?
Kind regards,
Talal
On 5 Aug 2015, at 13:15, tala...@fastmail.fm wrote:
Dear
(such that I should
cease my attempts)? Is \useexternaldocument the wrong command for this purpose?
Minimum example files below:
% project
\project project_xref
\startproduct prd_xref
\component xref1
\component xref2
\stopproduct
% product
\startproject project_xref
\environment env_xref
EnvironmentA’s layout, while the second part—ComponentB—uses EnvironmentB's. If
any startsetups need to be defined, I’d be grateful for any example, showing
also where to place them.
# Product
\startproduct MyProduct
\component ComponentA
\component ComponentB
\stopproduct
# EnvironmentA
Hi, Wolfgang--
On Mon, Aug 3, 2015 at 1:18 AM, Wolfgang Schuster
schuster.wolfg...@gmail.com wrote:
Is it possible that your main file of your document is a project?
When this is the case change this file to a product and all subfiles into
components.
Yes, that was the problem. And I can
is
moderately complex, including an environment file and several product
files. Each project produced output in the past. But now I run
'context file', and there are no obvious errors (except for fonts
not found, but in that case the default font should be used instead,
correct?), yet no PDF is produced
version: 2015.05.18 12:26
I have tried the hello world example described on the wiki, and the
output from that is exactly as expected, but I am having trouble with a
couple of projects that I created in 2006. Each project is moderately
complex, including an environment file and several product files
On 7/22/2015 3:47 PM, Alan BRASLAU wrote:
On Wed, 22 Jul 2015 14:54:17 +0200
Thomas A. Schmitz thomas.schm...@uni-bonn.de wrote:
On 07/22/2015 02:45 PM, Alan BRASLAU wrote:
The
project/product/component mechanism can help somewhat. I also know
that Thomas had written a streams module
On Wed, 22 Jul 2015 14:54:17 +0200
Thomas A. Schmitz thomas.schm...@uni-bonn.de wrote:
On 07/22/2015 02:45 PM, Alan BRASLAU wrote:
The
project/product/component mechanism can help somewhat. I also know
that Thomas had written a streams module to handle the
synchronization of texts
-references
between both books. IIRC you can then take the TOC in one product or
component and place it in the other. So in the English book you can
place the Arabic TOC and vice versa.
This raises a related, more general question on how to handle
multilingual documents. The English first half
this way). Then you can do cross-references between both books. IIRC
you can then take the TOC in one product or component and place it in the
other. So in the English book you can place the Arabic TOC and vice versa.
Of course you will want to define a separate TOC control sequence for
each
On 07/22/2015 02:45 PM, Alan BRASLAU wrote:
The
project/product/component mechanism can help somewhat. I also know that
Thomas had written a streams module to handle the synchronization of
texts. However, I am not so sure how to go about this in a real,
full-fledged case with a complicated text
I've released a version of the ConTeXt BBLM that better manages files
referenced by environment or project structure commands.
The language module populates the BBEdit Includes Menu with files
referenced by:
\environment
\project
\product
\component
getting the following sections (obviously):
1. A
2. B
Similarly, when compiling A.mkiv, I'm getting:
1. A
and for B.mkiv:
1. B
But: is there a way to say to ConTeXt - when compiling just B.mkiv - that
B.mkiv is supposed to be a part of a product (Book.mkiv) and so that the
chapter should be numbered
the following sections (obviously):
1. A
2. B
Similarly, when compiling A.mkiv, I'm getting:
1. A
and for B.mkiv:
1. B
But: is there a way to say to ConTeXt - when compiling just B.mkiv - that
B.mkiv is supposed to be a part of a product (Book.mkiv) and so that the
chapter should be numbered from
Windows 8.1 Enterprise (ie. I
think the top product) and even ConTeXt not installed because the
installation procedure did not find DLL. At the moment I do not know what it
could be. Maybe when I install the drivers (I had trouble installing the
graphics driver) something screwed up. Perhaps
works as it should.
On my own laptop I install Windows 8.1 Enterprise (ie. I
think the top product) and even ConTeXt not installed because
the installation procedure did not find DLL.
Please try again (you need to download
http://distribution.contextgarden.net/setup/context-setup-mswin.zip
Windows 8.1 Enterprise (ie. I
think the top product) and even ConTeXt not installed because
the installation procedure did not find DLL.
Please try again (you need to download
http://distribution.contextgarden.net/setup/context-setup-mswin.zip
again). I added the missing dll. If any other
, and there I ConTeXt standalone installed ok and everything
works as it should. On my own laptop I install Windows 8.1 Enterprise (ie. I
think the top product) and even ConTeXt not installed because the
installation procedure did not find DLL. At the moment I do not know what it
could be. Maybe when
Thanks to Lukas and Mojca too for the reply.
The problem may be elsewhere. At my working computer (at work) I have Windows
8.1, and there I ConTeXt standalone installed ok and everything works as it
should. On my own laptop I install Windows 8.1 Enterprise (ie. I think the top
product
.)
For semantic coherence changed the “typesetting finished” emoji from U+1F3C1
to U+1F37A ;-)
Manual: Added note on auto syntax check in Product Mode.
--
Thomas
___
If your question is of interest to others
changed the “typesetting finished” emoji from
U+1F3C1 to U+1F37A ;-)
Manual: Added note on auto syntax check in Product Mode.
--
Thomas
___
If your question is of interest to others as well, please add an entry
reason.
Hans suggested to put the command inside the first line (modeline or
however that one is called).
But context --synctex filename.tex generally works.
Yes, this is strange. `\enabledirectives [system.synctex]` works for me *if*
it’s in the product file (no `--synctex` switch needed
.
Hans suggested to put the command inside the first line (modeline or
however that one is called).
But context --synctex filename.tex generally works.
Yes, this is strange. `\enabledirectives [system.synctex]` works for me
*if* it’s in the product file (no `--synctex` switch needed). It even
Am 13.03.2015 um 09:01 schrieb Wolfgang Werners-Lucchini w...@musensturm.de:
According toll my observations, you need to reference the needed parts
inside of the \start... and \stop..., so your product would become:
```
\startproduct pd-medizin
\project pj-medizin
\component test
just yet.
For now, success will depend on your personal and business
vision, drive, talent, and the amount of capital you can raise.
Let's put that last item into perspective: the average cost of
getting national grocery store shelf exposure for a new product
by a branded manufacturer has been
The wiki doesn’t really help. Am I supposed to create another product
file in …/products?
no, just enable it ... export files end up in a subpath
I did add this to the environment file and tried to create an ePub for
the whole book and for an individual chapter, but no success yet:
luna
probably also applies to me as I only recently started with a
fresh download of a current ConTeXt mkiv.
So, can someone tell me what I need to do to get a basic ePUB output?
\setupbackend
[export=yes]
more on wiki
The wiki doesn’t really help. Am I supposed to create another product
file
mkiv.
So, can someone tell me what I need to do to get a basic ePUB output?
\setupbackend
[export=yes]
more on wiki
The wiki doesn’t really help. Am I supposed to create another product file
in …/products?
no, just enable it ... export files end up in a subpath
I did add
=yes]
more on wiki
The wiki doesn’t really help. Am I supposed to create another product file in
…/products?
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg
output?
\setupbackend
[export=yes]
more on wiki
The wiki doesn’t really help. Am I supposed to create another product file in
…/products?
no, just enable it ... export files end up in a subpath
][margin=1.3em,pagecommand=\gobbleoneargument]
\define[1]\ChapterAbstract{\writetolist[chaptertext]{}{\start\itx#1\stop}}
\stopenvironment
=
test.tex mkii
\showgrid
\startcomponent c_loosely
\product prd_book
\project
According toll my observations, you need to reference the needed parts
inside of the \start... and \stop..., so your product would become:
```
\startproduct pd-medizin
\project pj-medizin
\component test
\stopproduct
```
You also have to restructure the other files, so that \start
\product pd-medizin
\stopproject
--pd-medizin.tex---
\project pj-medizin
\startproduct pd-medizin
\component test
\stopproduct
--test.tex---
\project pj-medizin
\product pd-medizin
\startcomponent test
---
\environment env-medizin
\startproject pj-medizin
\product pd-medizin
\stopproject
--pd-medizin.tex---
\project pj-medizin
\startproduct pd-medizin
\component test
\stopproduct
--test.tex
According toll my observations, you need to reference the needed parts
inside of the \start... and \stop..., so your product would become:
```
\startproduct pd-medizin
\project pj-medizin
\component test
\stopproduct
```
You also have to restructure the other files, so that \start
What I am doing wrong?
Ignore the project file and load the environment file instead at the
begin of your product and component files.
Wolfgang
This is not working! And what shall I do if I have more than one
product?
Wolfgang
mtx-context | run
Am 12.03.2015 um 21:10 schrieb Wolfgang Werners-Lucchini w...@musensturm.de:
What I am doing wrong?
Ignore the project file and load the environment file instead at the
begin of your product and component files.
Wolfgang
This is not working! And what shall I do if I have more than
-arbeiders\\ 10 \NC \AR
\NC \NC \VL \NC \NC \AR
\NC \NC \VL \NC \NC \AR
\NC \VL Nationaal\\ inkomen\\ 30 \VL \VL Winst van de\\ industriële
kapitalist\\ 10 \NC \AR
\NC \VL \VL \VL \NC \AR
\NC \VL \VL \VL Commerciële\\ winst\\ 3 \NC \AR
\NC Totaal\\ maatschappelijk\\ product\\ 90 \VL \VL Meerwaarde
On 17 Jul 2014, at 2:19, Thomas Floeren wrote:
Hello,
Some months ago I wrote a little AppleScript script with one purpose:
It should be a flexible script to launch ConTeXt typesetting,
independently of the text editor I’m using and it should be capable
to typeset the Product file even
Am 14.01.2015 um 19:28 schrieb 19cat d...@nou.cat:
Hello, again.
I have another issue.
When I put \definefontfeature command into environment file, doesn't work. I
must put in product file, before \startproduct command.
You know why?
Load the environment before \startproduct
Hello, again.
I have another issue.
When I put \definefontfeature command into environment file, doesn't work. I
must put in product file, before \startproduct command.
You know why?
This is my tree structure:
prd_productname
env_productname
c_title
c_chapter1
structure (components), and you need
to tinker a lot with the results, since even available information like
title is not written to the relevant ePub files.
rootnode .. in what sense?
Sorry Hans, I complained about that several times already:
If I have a project structure, i.e. a product
:
If I have a project structure, i.e. a product with components, export.xml
starts like
“““
?xml version=1.0 encoding=UTF-8 standalone=yes ?
!-- input filename : prd_hraban--
!-- processing date : Tue Aug 26 12:55:41 2014 --
!-- context version : 2014.08.19 11:57 --
!-- exporter
.
The dimensions are correct when you use MkIV.
I'd rather not change my production work to a research product :-) Too risky.
And officially mkii is still maintained (or that is what I read).
\rotate[rotation=90]{\externalfigure[cow][width=4cm]}
This works better, but the figure's size
between
my testversions and the final product, with exactly the same setups, led to a
result that more or less forced me to reposition and/or redimension most of my
520 carefully positioned floats, a few days before the deadline.
Anyway, sorry for the noise.
Best regards,
Robert Blackstone
\blank[force,2*big]
\stopsetups
My main product file has
\startfrontmatter
\startbuffer [chapter:quote]
A Quote\crlf
{\tf An author}
\stopbuffer
\completecontent
\component c_introduction
\stopfrontmatter
\startbodymatter
Now, before the content chapter and after that initial
[right]
\noheaderandfooterlines
\blank[force,2*big]
\stopsetups
My main product file has
\startfrontmatter
\startbuffer [chapter:quote]
A Quote\crlf
{\tf An author}
\stopbuffer
\completecontent
\component c_introduction
\stopfrontmatter
\startbodymatter
Now, before the content
]
\stopnarrower
\stopalignment
\resetsetups[quote:text]
\page[right]
\noheaderandfooterlines
\blank[force,2*big]
\stopsetups
My main product file has
\startfrontmatter
\startbuffer [chapter:quote]
A Quote\crlf
{\tf An author}
\stopbuffer
\completecontent
\component
On 01 Aug 2014, at 16:13, Otared Kavian ota...@gmail.com wrote:
[…]
I’ve tried to add this to my environment and product file, but even without
using it, it ends in an error:
(/usr/local/texlive/2014/texmf-dist/tex/context/base/spec-tpd.mkii
specials: loading definition file fdf
{\strc_references_conditional\in}
\unexpanded\def\conditionalabout{\strc_references_conditional\about}
\protect
But I'll not enable it to the code as it's not used anyway (maybe sometime a
module).
I’ve tried to add this to my environment and product file, but even without
using it, it ends in an error
On 01 Aug 2014, at 13:30, Gerben Wierda gerben.wie...@rna.nl wrote:
[…]
I’ve tried to add this to my environment and product file, but even without
using it, it ends in an error:
(/usr/local/texlive/2014/texmf-dist/tex/context/base/spec-tpd.mkii
specials: loading definition file
On 7/17/2014 2:19 AM, Thomas Floeren wrote:
Hello,
Some months ago I wrote a little AppleScript script with one purpose: It should
be a flexible script to launch ConTeXt typesetting, independently of the text
editor I’m using and it should be capable to typeset the Product file even if
I’m
using and it should be capable to typeset the Product
file even if I’m currently editing any component file belonging to that
Product file.
I used it for some time, I improved it, and I shared it with a collegue who
also works with ConText on OSX. We’re still using it, many bugs have been
. It’s an activity without formal design,
but with a lot of trial-and-error/testing.
Given that status (and the fact that it has had that status for
over a decennium), I don’t expect it to ever become a serious
product that is (semi-)professionally managed. I prefer content
over
I have been a tech writer for more than 25 years. I have been using and
learning Context for the last few years. I would agree with everyone in
thanking Hans and everyone else for this great product and it's support. It's
been mentioned that the source is available to view. Is it possible
On 7/16/2014 5:08 PM, Russ Urquhart wrote:
I have been a tech writer for more than 25 years. I have been using and
learning Context for the last few years. I would agree with everyone in
thanking Hans and everyone else for this great product and it's support. It's
been mentioned
for this great product and it's support.
It's been mentioned that the source is available to view. Is it possible
that, given some standard of commenting with the code , a tool like Doxygen
could be used to compile a reference guide of sorts?
the interface is described in cont-en.xml (should
Hello,
Some months ago I wrote a little AppleScript script with one purpose: It should
be a flexible script to launch ConTeXt typesetting, independently of the text
editor I’m using and it should be capable to typeset the Product file even if
I’m currently editing any component file belonging
as they go
along. It’s an activity without formal design, but with a lot of
trial-and-error/testing.
Given that status (and the fact that it has had that status for over a
decennium), I don’t expect it to ever become a serious product that is
(semi-)professionally managed. I prefer content over
expect it to ever become a serious product that is
(semi-)professionally managed. I prefer content over management every day,
but something like this needs some minimal management. That requires both
time (=money) and capabilities. Besides, the tinkering researchers may not
be inclined to do
a serious product that is
(semi-)professionally managed. I prefer content over management every day,
but something like this needs some minimal management. That requires both
time (=money) and capabilities. Besides, the tinkering researchers may not
be inclined to do that, they want to tinker.
BTW
along. It’s an activity without formal design, but with a lot of
trial-and-error/testing.
Given that status (and the fact that it has had that status for over a
*decennium*), I don’t expect it to ever become a serious product that is
(semi-)professionally managed. I prefer content over
with them as they go along. It’s an activity without
formal design, but with a lot of trial-and-error/testing.
Given that status (and the fact that it has had that status for
over a /decennium/), I don’t expect it to ever become a serious
product that is (semi
and undocumented models/programs and tinkering with
them as they go along. It’s an activity without formal design, but with
a lot of trial-and-error/testing.
Given that status (and the fact that it has had that status for over a
/decennium/), I don’t expect it to ever become a serious product that is
(semi
a
decennium), I don’t expect it to ever become a serious product that is
(semi-)professionally managed. I prefer content over management every day,
but something like this needs some minimal management. That requires both
time (=money) and capabilities. Besides, the tinkering researchers may
that status (and the fact that it has had that status for over a
/decennium/), I don’t expect it to ever become a serious product that
is (semi-)professionally managed. I prefer content over management
every day, but something like this needs some minimal management. That
requires both time (=money
/programs and tinkering with
them as they go along. It’s an activity without formal design, but
with a lot of trial-and-error/testing.
Given that status (and the fact that it has had that status for over a
/decennium/), I don’t expect it to ever become a serious product that
is (semi
??first ??last, Thank you for your interest in
??product... etc.
I am rather new to ConText and just starting to get the hang of it, long
time latex user, the transition starts off rather confusing, but once it
makes sense it opens up a whole toolbox of available tools which is great.
Just
??first ??last, Thank you for your interest in
??product... etc.
I am rather new to ConText and just starting to get the hang of it, long
time latex user, the transition starts off rather confusing, but once it
makes sense it opens up a whole toolbox of available tools which is great.
Just
(much like nlatexdb) if possible.
- example: Dear ??first ??last, Thank you for your interest in
??product... etc.
I am rather new to ConText and just starting to get the hang of it, long
time latex user, the transition starts off rather confusing, but once it
makes sense it opens up
) if possible.
- example: Dear ??first ??last, Thank you for your interest in
??product... etc.
I am rather new to ConText and just starting to get the hang of it, long
time latex user, the transition starts off rather confusing, but once it
makes sense it opens up a whole toolbox
= 1, #m[1] do
local mTrow={}
for i=1, #m do
local temp = m[i][j]
table.insert(mTrow, temp)
end
table.insert(mT, mTrow)
end
return mT
end
Don't forget the local here:
matrixOP.inner = function (u, v) -- inner product of two vectors
(subdirectory)
Book/Volume1/volume1.tex (product file)
Book/Volume1/Chapter1 (subsubdirectory)
Book/Volume1/Chapter1/chapter1.tex (component file)
I am forced to put the goodies file baskervald-math.lfg in
Book/Volume1/Chapter1. When I put it in Book and compiled chapter1.tex
separately
(Project file)
Book/fonts.tex (environment file)
Book/Volume1 (subdirectory)
Book/Volume1/volume1.tex (product file)
Book/Volume1/Chapter1 (subsubdirectory)
Book/Volume1/Chapter1/chapter1.tex (component file)
I am forced to put the goodies file baskervald-math.lfg in
Book/Volume1/Chapter1. When I
On 3/22/2014 8:44 PM, Alan Bowen wrote:
Hans—there are still some odd failures in hyperlinking between components.
At least in the following product file with two components, some links
work (\reference), some only sometimes (\at) and others never (\in). The
problem seems to be with labels
product file with two components, some links
work (\reference), some only sometimes (\at) and others never (\in). The
problem seems to be with labels.
\startproduct LinkTest
\setupinteraction[state=start]
\component Test01
\component Test02
\stopproduct
\startcomponent Test01
\product
Hans--there are still some odd failures in hyperlinking between components.
At least in the following product file with two components, some links work
(\reference), some only sometimes (\at) and others never (\in). The problem
seems to be with labels.
\startproduct LinkTest
\setupinteraction
, I get the broken export.xml and the complete
somefile.xhtml, so I guess xhtml=yes causes overwriting the complete file with
the incomplete one.
As far as I remember previous discussions, this incomplete content is caused by
the project structure (using project, product, environment); from
testproject would have included anyway. e.g.
\environment env
\startcomponent test
\input knuth
\stopcomponent
Here, env.tex has all the setups including the font setups (and one
would do the same in the product file, i.e. in the file that includes
the components, by putting \environment env before
can’t use ‘\end’ in internal vertical mode
Can anyone shed some light?
Without more information I can only guess what the problem is.
One possibility is that you have product, component or TeXpage environment
used inside of \framed or a framed text environment. Another possibility
'm getting this error with Mark IV.! You can’t use ‘\end’ in internal vertical modeCan anyone shed some light?Without more information I can only guess what the problem is.One possibility is that you have product, component or TeXpage environmentused inside of \framed or a framed text environmen
possibility is that you have product, component or TeXpage environment
used inside of \framed or a framed text environment. Another possibility is
a forgotten
\start command of one the previous mentioned environments.
Wolfgang
Sanjoy Mahajan san...@olin.edu writes:
The wiki page for Project Structure has always shown setups (via
\project ... ) going after the \startcomponent or \startproduct. I've
edited the examples to have setups before the
\start(product|component). If I did it wrong, let me know.
My change
with \starttext etc. and to avoid some
problems it’s better to put all setup commands before it.
Agreed. The wiki page for Project Structure has always shown setups
(via \project ... ) going after the \startcomponent or \startproduct.
I've edited the examples to have setups before the
\start(product
them.
However, I am always amazed at what experienced users are able to achieve - so
I thought I should ask. Can MTPro2 be installed on ConTeXt?
The product is clearly targeted at LaTeX and is easily installed on LaTeX,
XeLaTex and LuaLaTeX. The company also provide a means of installation
.html
so it may not be possible to install them.
However, I am always amazed at what experienced users are able to achieve - so
I thought I should ask. Can MTPro2 be installed on ConTeXt?
The product is clearly targeted at LaTeX and is easily installed on LaTeX,
XeLaTex and LuaLaTeX
of the last page of the product
of some run. To avoid this undesirable outcome, it seems to me that one is
forced to provide some help to *Context* via some text marks or some code, but
I have not been able to conjecture what they should be.
The clearest arrangement would seem to be the inclusion
of a book with some small decorative
element, be it text or graphics; let us call it a *Fleuron*. Just putting it
in the last line of the text file to be typeset, one can take for sure that
earlier or later it will end appearing as the only element of the last page
of the product of some run
the table
again.
The product teacher.tex (a teacher manual) can be defined as shown on the
opposite site. What does opposite site mean?
In most cases working with only \starttext and \stoptext in combination
with \input or \enviroment is sufficient. Sufficient for what?
A project structure has
)? I mean that if you are prepared to install
TeXLive, this shouldn't be a space issue. Just curious...
Regards,
Mari
_
I can use the standard context product. Unfortunately for me The
download for windows of either
open the document with all other installed pdf
viewers; bookmarks; page thums; layers; attached files; many printing opts including n x
m pages per sheet; ...
http://www.tracker-software.com/product/pdf-xchange-viewer
It might be good to support this viewer, too, for completeness.
Command line
product in it.
___
If your question is of interest to others as well, please add an entry
to the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl
project is one document in one
differently named file and references.tex is just one product in it.
___
If your question is of interest to others as well, please add an entry
to the Wiki!
maillist : ntg-context
. link to references.pdf while my project is one document in one
differently named file and references.tex is just one product in it.
___
If your question is of interest to others as well, please add an entry
to the Wiki
.
\startcomponent title_page
\product bachelors_thesis_text
\project bachelors_thesis
\definelayer
[document_data]
[x=0mm, y=0mm, width=20cm, height=30cm]
\definelayer
[document_logo]
[x=0mm, y=0mm, width=20cm, height=30cm]
\setupbackgrounds[page][background={document_logo,document_data
for (setup)cite.
P.S.:
As for my motives, the links:
1. are missing when using the 'authoryear' alternative with APA
bibliography style;
2. link to references.pdf while my project is one document in one
differently named file and references.tex is just one product
Thanks, Thomas. This is good to have for many purposes. But, for the task
of generating PDFs of components that are part of a larger product, the
problem of cross-references is but one of several issues—especially if one
wants ConTeXt to do most (if not all) of the work.
Alan
On Sun, May 5
Wolfgang: OK—but a clarification. Yes, that will give me the individual
component files, but not with the page numbers etc that they would have
when they are compiled as part of the product. What I am interested in is
the extraction of component files during the compilation of a larger
product
On 05/05/2013 02:27 PM, Alan Bowen wrote:
Wolfgang: OK—but a clarification. Yes, that will give me the individual
component files, but not with the page numbers etc that they would have
when they are compiled as part of the product.
http://pragma-ade.com/general/magazines/mag-1103.pdf
HTH
Wolfgang—
Can this be extended so as to allow the extraction of the individual
component files (as PDFs with their component names) when processing a
product file?
Alan
On Thu, May 2, 2013 at 2:44 AM, Wolfgang Schuster
schuster.wolfg...@gmail.com wrote:
Am 01.05.2013 um 23:02 schrieb
201 - 300 of 821 matches
Mail list logo